R Serpent - Novarossi Owners manual Novarossi pullstart engine P3 XS
Introduction R Thank you very much for choosing a Novarossi engine. Read this manual with great attention before racing the engine. For your own safety as well as for others, and to ensure you can enjoy your Novarossi engine for a long time. The engine is manufactured from precision parts. Always treat the engine and parts very carefull and avoid dirt and damage at all times. The carburetor of the engine is pre-set in such way that easy starting is possible.
Starting the engine Notes before to start: - Before you start the engine, first switch on the receiver and then the radio and perform all checks as above. - When pulling the pullstarter, make sure not to pull out more than 20cm. If you pull out more the device inside may damage and the rope will not return into the case. - When the engine is new it need a session of run-in, before the engine can be run at high speeds, follow the instructions as per below.
Factory normal and reverse carburettors settings RTR/SPT C5S CARBURETTOR 01000 CODE: 24069 Reverse 11034 11009 02034SP 11010 11016 24169 11012 28003 11014 03005 0.30 mm 03003 0.20 mm 03005 0.30 mm 11007 04001 11015 05000 11019 08058 11006L 11011 24470 08558 11018 24400 06000 Optional 03002 0.15 mm 03001 0.10 mm 03004 0.25 mm 24069 07001 27000 14002 20000 22812 12000 17007 14001 21000 22803 S19001 S18011 14800 15019SP 13024 16000 09003N NOVAROSSI WORLD S.r.l.
