Datasheet

ManualsBrandsTraco Power ManualsPOWERBattery Controller Module 360W 48V 15A 360W 48V 15A

http://www.tracopower.com Page 1 of 8

Battery Controller Module

TSP-BCMU360 Series, 360 Watt

Features

◆ Universal battery controller module for

uninterruptable 24 VDC and 48 VDC

bus voltage

◆ Redundant inputs for two indepedant

sources

◆ Battery protection for over voltage,

deep discharge, short circuit and

reverse connection

◆ Alarm outputs for input, output and

battery condition

◆ Remote On/Off for battery

◆ Controlled end of charge voltage by

temperature sensor

◆ International safety approval package

◆ 3-year product warranty

* Maximum current at nominal Vout

IEC 60950-1

EMC

C B

Scheme

This module provides a professional battery management system to charge and

monitor an external 12V lead-acid battery. Together with a power supply of the

TSP series or any other stabilized 24 VDC or 48 VDC power supply a perfect DC-

UPS system can be conﬁgured. The connected battery will be charged and held

in charged mode by the power supply. In the event of a mains power failure the

battery will supply the output power until the battery is discharged. A step up con-

verter is used to maintain the selected output voltage level, Vnom - 6% (typical). To

avoid overcharging the battery, an external temperature sensor adjusts the battery

voltage automatically to the required end of charge voltage. This can extend the

battery life. The battery is protected against deep discharge. Mains power and bat-

tery status are monitored regularly and failures indicated by corresponding LED’s

and alarm outputs. The module also provides an external On/Off input to switch-off

both, power supply and battery.

TSP-TS battery temperature sensor

(10 kOhm NTC with 2m cable) optional

Order code Inputs Input voltag range

Output Current

max.*

Output Power

max.

Back up battery

TSP-BCMU360

2 x 360 W, for any single

or two identical 24 VDC or

48 VDC sources

24–28 or 48–56 VDC

(range selection with

jumper)

24 VDC / 15 A

48 VDC / 7.5A

360 W

12V lead acid battery

(to purchase on local

market, or TRACO

POWER battery pack)

Models

UL 60950-1

Accessory:

TRACO POWER 12V battery pack: TSP-BAT12-072

Datasheet: www.tracopower.com/products/tsp-panas_072.pdf

Summary of content (8 pages)

PAGE 1
Battery Controller Module TSP-BCMU360 Series, 360 Watt CB Features ◆ Universal battery controller module for EMC Scheme UL 60950-1 IEC 60950-1 uninterruptable 24 VDC and 48 VDC bus voltage ◆ Redundant inputs for two indepedant sources ◆ Battery protection for over voltage, deep discharge, short circuit and reverse connection ◆ Alarm outputs for input, output and battery condition ◆ Remote On/Off for battery ◆ Controlled end of charge voltage by temperature sensor ◆ International safety approval
PAGE 2
Battery Controller Module TSP-BCMU360 Series 360 Watt Output Specifications Output voltage / current – Normal Mode – Buffer Mode Efficiency (load >50 % of Iout max.) 24 VDC mode: 48 VDC mode: 24 VDC mode: 48 VDC mode: – Normal mode – Buffer mode Vin – (0.4 - 0.8V); 15 A max. Vin – (0.4 - 0.7V); 7.5 A max. 22.2 – 22.9 VDC; 10 A (15 A in boost mode for 10min) 44.6 – 45.3 VDC; 5 A (7.
PAGE 3
Battery Controller Module TSP-BCMU360 Series 360 Watt Function Specification Function Diagram: 1. General Description The TSP-BCMU360 module extends any 24VDC or 48VDC power supply to a DC-USV (uninterruptable DC Power supply). This module is a standalone unit and is designed to function with the Traco TSP series; however it can be used in conjunction with any fully stabilized 24V or 48V DC power supply output.
PAGE 4
Battery Controller Module TSP-BCMU360 Series 360 Watt Function Specification (continued) 3. Battery When the input DC voltage is present, the TSP-BCMU360 unit will automatically charge the connected battery to a set end of battery charge voltage level, factory set for 25ºC for lead-acid batteries, using a constant current charging method of 1A (typical).
PAGE 5
Battery Controller Module TSP-BCMU360 Series 360 Watt Function Specification (continued) 4. Ambient temperature and power rating The TSP-BCMU360 module operates at temperatures between –25ºC - 70ºC. In normal mode the module can deliver full power up to 60ºC. In Buffer mode, a current derating of 2%/ ºC is required for 24V applications above 50ºC. The boost current of 15A is available at ambient temperatures up to 40ºC for a duration of 10 minutes as shown in Figure 3.
PAGE 6
Battery Controller Module TSP-BCMU360 Series 360 Watt Function Specification (continued) 5. Battery Remote On/Off The TSP-BCMU360 module provides a Battery Remote on/off input (2 pins on signal connector); if this input is short circuited (switch closed in Figure 5) the battery will be disconnected from the unit by means of an internal relay. A voltage of 1V or less across the Battery Remote on/off terminals will disconnect the battery from the unit.
PAGE 7
Battery Controller Module TSP-BCMU360 Series Connector Position 360 Watt Top View Bottom View DC IN OK Bat. OK DC OUT OK Remote On/Off Temp. Sensor (TS) DC-IN-OK BATT-OK DC-OUT-OK Remote On/Off Temp.
PAGE 8
Battery Controller Module TSP-BCMU360 Series 360 Watt TSP–WMK Wall Mounting Bracket Ordercode of Kit For Models Content of Kit TSP-WMK03 TSP-BCMU360 1 bracket TSP-WMK03 85.0 (3.35) 42.5 (1.67) 34.5 (1.36) 34.5 (1.36) R 2.12 (0.083) 7.0 (0.28) 15.0 (0.59) 37.0 (1.45) 25.0 (0.98) 25.0 (0.98) 74.0 (2.91) 2.0 (0.08) 55.0 (2.16) 4 x positioning holes 2.0 (0.08) 2.0 (0.08) R 2.12 (0.083) 2.0 (0.08) ø 4.25 (0.17) R 2.12 (0.083) ø 4.25 (0.17) R 2.12 (0.083) ø 4.25 (0.17) 15.0 (0.