Datasheet

Created by Traco Electronic AG Arp Page 1 of 1 pages Rev.:1.1 / Date: February 29, 2012
Traco Electronic AG Tel.: [phone]
Jenatschstrasse 1 Fax: [phone]
CH – 8002 Zürich Email: [e-mail]
Switzerland URL: http://www.tracopower.com
All dimensions in mm
SPECIFICATIONS
Pin 1-2: 497μH ±25% Pin 3-4: 497μH ±25%
Inductance
Test Condition: 100KHz/20mV
Measurement Instrument: HP 4263B LCR Meter
DCR(Max): 100mΩ
Impedance
Measurement Instrument: HIOKI 3540 mΩ Hitester
IDC(Max): 1.7A
Rated current
Measurement Instrument: Agilent 34401A Meter
Rated voltage 500Vdc between line(N1) & line(N2)
Insulation 1500VAC @ 2mA 60Sec between line(N1) & line(N2)
Operating temperature -40°C ~ +105°C
Recommended Through Hole
Ф 0.8 mm
T
CK-017
Pin 1 Mark
SIDE VIEW
T
OP VIEW
FRONT VIEW