Datasheet

TDL 3 Series, 3 Watt
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
www.tracopower.com
Page 3 of 3
Rev. June 02. 2016
General Specifications (continued)
Switching frequency 100 kHz min.
Safety standards UL 60950-1
IEC/EN 60950 -1
– Certification documents www.tracopower.com/overview/tdl3
Environmental compliance – Reach www.tracopower.com/products/reach-declaration.pdf
– RoHS RoHS directive 2011/65/EU
Physical Specifications
Casing material non-conducting FR4 (UL 94V-0 rated)
Potting material Silicone (UL 94V-0 rated)
Pin material tinned copper
Package weight 3.9 g (0.137 o z)
Soldering temperature max. 260°C / 10 sec.
Outline Dimensions
Pin Single Dual
1
–Vin (GND) –Vin (GND)
4
+Vin (Vcc) +Vin (Vcc)
5
+Vout +Vout
6
no pin Common
7
–Vout –Vout
Pin-Out
Dimensions in [mm], () = Inch
Tolerances: x.x ±0.5 (±0.02)
x.xx ±0.25(±0.01)
pin dimension tolerance ±0.05 (±0.002)
3.1
(0.12)
7.75
(0.30)
8.0
(0.31)
0.5
(0.02)
14.0 (0.55)
7.62 (0.30)
3 x 2.54
(3 x 0.10)
bottom view
1 4
567
14.0
(0.55)
7.62
(0.30)
3.19
(0.13)
3.19 (0.13)