Datasheet

http://www.tracopower.com Page 3 of 4
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
DC/DC Converters
TDR 3WI Series 3 Watt
EMC Consideration
Recommended filter for
EN 55022 class A compliance
Input models C1 C3 L1
value
order code
(SMD type) datasheet:
12 VDC 4.7 µF / 25 V 1812 MLCC 10 µH
TCK-047
www.tracopower.com/products/tck047.pdf
24 VDC 4.7 µF / 50 V 1812 MLCC 220pF / 3 kV 1808 MLCC 12 µH
TCK-062
www.tracopower.com/products/tck062.pdf
48 VDC 4.7 µF / 100 V 1812 MLCC 10 µH
TCK-047
www.tracopower.com/products/tck047.pdf
General Specifications
Thermal shock acc. MIL-STD-810F
Vibration acc. MIL-STD-810F
Reliability, calculated MTBF (MIL-HDBK-217F, at+25°C, ground benign) >2.0 Mio h
Isolation voltage (60 sec.) – Input/Output 1500 VDC
Isolation capacitance – Input/Output 50 pF max.
Isolation resistance – Input/Output (500 VDC) >10 GOhm
Altitude during operation tba.
Safety standard (designed to meet) IEC/EN 60950-1, UL 60950-1
Safety approvals – UL/cUL www.ul.com -> certifications -> File e188913
Switching frequency 100 kHz (PWM)
Remote On/Off – On: open or high impedance
– Off: 2...4 mA current applied via 1KOhm resistor
– Off stand by input current 2.5 mA max.
Environmental compliance – Reach www.tracopower.com/products/tdr3wi-reach.pdf
– RoHS RoHS directive 2011/65/EU
TDR 3WI
dc/dc-converter
Load
L1
C1
C3
+Vin
-Vin
+Vout
-Vout
TDR 3WI
dc/dc-converter
Load
L1
C1 C2
C3
+Vin
-Vin
+Vout
-Vout
Input models C1 & C2 C3 L1
value
order code
(SMD type) datasheet
12 VDC 6.8 µF / 25 V 1812 MLCC 10 µH
TCK-047
www.tracopower.com/products/tck047.pdf
24 VDC 4.7 µF / 50 V 1812 MLCC 220pF / 3 kV 1808 MLCC 12 µH
TCK-062
www.tracopower.com/products/tck062.pdf
48 VDC 4.7 µF / 100 V 1812 MLCC 18 µH
TCK-046
www.tracopower.com/products/tck046.pdf
Recommended filter for
EN 55022 class B compliance