Datasheet

Page 3 of 3
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
www.tracopower.com
Physical Specifications
Casing material copper nickel plated
Baseplate non conductive FR4
Potting material epoxy (UL 94V-0 rated)
Weight 32 g (1.13oz )
Soldering temperature max. 265°C / 10 sec.
Outline Dimensions
5.08
10.16
20.32
25.4
10.2
6.0
50.8

1 5.2
20.32
Insulated baseplate
(2.0) 
(0.8)
(0.6)
(0.2)
(0.4) (0.4)
(0.8)
(1.0)
2.5
(0.1)
(0.40)
(0.24)
Bottom View
1
4
3
2
5
10.16
10.2
(0.4)
Pin Single Dual
1
+Vin (Vcc) +Vin (Vcc)
2
–Vin (GND) –Vin (GND)
3
+Vout +Vout
4
No pin Common
5
–Vout –Vout
Pin-Out
Dimensions in [mm], () = Inch
Pin diameter: 1.0 ±0.05 (0.02 ±0.002)
Pin pitch tolerances: ±0.13 (±0.005)
Case tolerances: ±0.25 (± 0.01)
Rev. March 16. 2015
DC/DC Converters
TEL 15 Series 15 Watt
Note:
Before attaching the heatsink, the product
label on converter has to be removed for
optimal performance.
For volume orders we can supply the
converters with heatsink already mounted.
Please contact us for a relative quotation.
Order code: TEN-HS4
(cont.: heat-sink, thermal pad, 2 clamps)
Material: Aluminum
Finish: Anodic treatment (black)
Weight: 9 g ( 0.31oz) without converter
Thermal impedance after assembling: 10 K/W
18.0 (0.71)
max.
Converter
Heat-sink
Thermal pad
Clamp
31.0
(1.22)
max.
23.0 (0.91)
Heat-sink TEN-HS4 (optional)
Heat-Sink (Option)