Datasheet

ManualsBrandsTRACOPOWER ManualsPSU ComponentsDC/DC converter (print) 12 Vdc 5 Vdc 2 A 10 W No. of outputs: 1 x

ht tp://www.t racopower.com Page 1 of 4

Features

u Wide 2:1 input range

u High power density

u Operating temperature range

–40°C to +85°C

u Indeﬁnite short circuit protection

u I/O isolation 1500 VDC

u Input ﬁlter to meet EN 55022, Class A

and FCC, level A without external

components

u Industry standard pinout

u Shielded metal case with insulated

baseplate

u High reliability, MTBF >1 Mio. h

u 3-year product warranty

DC/DC Converters

TEN 10 Series, 10 Watt

The TEN 10 series is a family of high performance 10W DC/DC converters in a com-

pact 2” x 1” low proﬁle package with industry standard footprint. A high efﬁciency

allows a wide operating temperature range of –40°C to +85°C. A built-in EMI ﬁlter is

built in to meet EN 55022, class A without any external components.

Further standard features include over voltage protection and short-circuit protection.

Typical applications for these converters are battery operated equipment, instrumen-

tation, distributed power architectures in communication and industrial electronics,

everywhere where isolated, tightly regulated voltages are required.

Order code Input voltage range Output voltage Output current max. Efﬁciency typ.

TEN 10-1210 3.3 VDC 2’400 mA 72 %

TEN 10-1211 5 VDC 2‘000 mA 77 %

TEN 10-1212 12 VDC 830 mA 80 %

TEN 10-1213 9 – 18 VDC 15 VDC 670 mA 80 %

TEN 10-1215 (12 VDC nominal) 24 VDC 415 mA 81 %

TEN 10-1221 ±5 VDC ±1‘000 mA 78 %

TEN 10-1222 ±12 VDC ±415 mA 81 %

TEN 10-1223 ±15 VDC ±330 mA 80 %

TEN 10-2410 3.3 VDC 2’400 mA 76 %

TEN 10-2411 5 VDC 2‘000 mA 78 %

TEN 10-2412 12 VDC 830 mA 82 %

TEN 10-2413 18 – 36 VDC 15 VDC 670 mA 82 %

TEN 10-2415 (24 VDC nominal) 24 VDC 415 mA 83 %

TEN 10-2421 ±5 VDC ±1‘000 mA 80 %

TEN 10-2422 ±12 VDC ±415 mA 82 %

TEN 10-2423 ±15 VDC ±330 mA 82 %

TEN 10-4810 3.3 VDC 2‘400 mA 76 %

TEN 10-4811 5 VDC 2‘000 mA 80 %

TEN 10-4812 12 VDC 830 mA 82 %

TEN 10-4813 36 – 75 VDC 15 VDC 670 mA 83 %

TEN 10-4815 (48 VDC nomial) 24 VDC 415 mA 83 %

TEN 10-4821 ±5 VDC ±1‘000 mA 81 %

TEN 10-4822 ±12 VDC ±415 mA 83 %

TEN 10-4823 ±15 VDC ±330 mA 83 %

Models

UL 60950-1

not recommended for new design in

Summary of content (4 pages)

PAGE 1
DC/DC Converters TEN 10 Series, 10 Watt Features u Wide 2:1 input range u High power density not u Operating temperature range ed end m m o c re gn in esi d w e n for UL 60950-1 –40°C to +85°C u Indefinite short circuit protection u I/O isolation 1500 VDC u Input filter to meet EN 55022, Class A and FCC, level A without external components u Industry standard pinout u Shielded metal case with insulated baseplate u High reliability, MTBF >1 Mio.
PAGE 2
DC/DC Converters TEN 10 Series 10 Watt Input Specifications Input current at no load 12 Vin models: 30 mA typ. 24 Vin models: 20 mA typ. 48 Vin models: 10 mA typ. Input current at full load 12 Vin; 3.3 VDC models: 12 Vin; 5 & ±5 VDC models: 12 Vin; other output models: 24 Vin; 3.3 VDC models: 24 Vin; 5 & ±5 VDC models: 24 Vin; other output models: 48 Vin; 3.3 VDC models: 48 Vin; 5 & ±5 VDC models: 48 Vin; other output models: 915 mA typ. 1080 mA typ. 1045 mA typ.
PAGE 3
DC/DC Converters TEN 10 Series 10 Watt General Specifications EMC immunity – Electrostatic discharge ESD – RF field susceptibility – Electrical fast transient / burst immunity input – Surge immunity – Immunity to conducted RF disturbances EN 61000-4-2 EN 61000-4-3 EN 61000-4-4 EN 61000-4-5 EN 61000-4-6 8 kV / 6 kV, criteria B 10 V/m, criteria A ±2 kV, criteria B ±1 kV, criteria B 10 Vrms, criteria A Thermal shock, mechanical shock & vibration EN 61373, MIL-STD-810F Safety standards
PAGE 4
DC/DC Converters TEN 10 Series 10 Watt Heat-Sink (Option) Heat-sink TEN-HS4 (optional) Order code: TEN-HS4 (cont.: heat-sink, thermal pad, 2 clamps) Material: Aluminum Finish: Anodic treatment (black) Weight: 9 g (0.31oz) without converter Heat-sink Thermal pad Clamp Converter 31.1 (1.22) 31.0 (1.22) max. 17.2 (0.68) max. Note: Before attaching the heatsink, the product label on converter has to be removed for optimal performance.