Datasheet

http://www.tracopower.com Page 2 of 4
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Input Specifications
Input current at no load 12 Vin models: 30 mA typ.
24 Vin models: 20 mA typ.
48 Vin models: 15 mA typ.
Input current at full load 12 Vin; 3.3 VDC models: 1470 mA typ.
12 Vin; other models: 1550 mA typ.
24 Vin; 3.3 VDC models: 730 mA typ.
24 Vin; other models: 780 mA typ.
48 Vin; 3.3 VDC models: 360 mA typ.
48 Vin; other models: 380 mA typ.
Surge voltage 12 Vin models: 36 V max.
(100 msec. max.) 24 Vin models: 50 V max.
48 Vin models: 100 V max.
Conducted noise (input) EN 55022 level A, FCC part 15, level A
Output Specifications
Voltage set accuracy ±1 %
Regulation – Input variation Vin min. to Vin max. 0.5 % max.
– Load variation 2 % – 100 % single output models: 0.5 % max.
dual output models: 1 % max. (balanced load)
5 % max. (load cross variation 25 % / 100 %)
Minimum load 2 % of rated max. output current.
(Operation at lower load is safe but major
deviations to specifyed data may occur)
Ripple and noise (20 MHz Bandwidth) single output models: 50 mVpk-pk max.
dual output models: 75 mVpk-pk max.
Temperature coefficient ±0.02 %/K
Start up time (nominal Vin and constant resistive load) 20 ms typ.
Transient response (25 % load step change) 250 µs typ.
Short circuit protection continiuous (automatic recovery)
Over load protection 150 % of Iout max typ. foldback
Over voltage protection 3.3 VDC models: 3.9 V
5.0 VDC models: 6.2 V
12 VDC models: 15 V
15 VDC models: 18 V
Capacitive load 3.3 VDC models: 10‘200 µF max.
5 VDC models: 7‘050 µF max.
12 VDC models: 1‘035 µF max.
15 VDC models: 750 µF max.
±5 VDC models: ±1‘020 µF max.
±12 VDC models: ±495 µF max.
±15 VDC models: ±165 µF max.
DC/DC Converters
TEN 15 Series 15 Watt