Datasheet

Page 3 of 3
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
www.tracopower.com
DC/DC Converters
TEN 20 Series 20 Watt
Physical Specifications
Casing material copper, nickel plated
Baseplate material non conductive FR4
Potting material silicon rubber TSE (UL 94V-0 rated)
Weight 30 g (1.05 oz)
Soldering temperature max. 260°C / 10 sec.
Environmental compliance – Reach www.tracopower.com/products/ten20-reach.pdf
– RoHS RoHS directive 2011/65/EU
Outline Dimensions
Insulated baseplate
Bottom View
1
4
3
2
5
6
50.8
±0.5
(2.0
±0.02
)
15.2 ±0.5
(0.60 ±0.02)
20.32
(0.80)
5.08
(0.20)
7.62
(0.30)
2.5 ±0.5
10.16
(0.40)
10.16
(0.40)
(1.00 ±0.02)
(0.24 ±0.02)
7.62
(0.30)
(0.10
±0.02
)
25.4 ±0.5
10.2 ±0.5
(0.40 ±0.02)
6.0 ±0.5
Pin Single Dual
1
+Vin (Vcc) +Vin (Vcc)
2
–Vin (GND) –Vin (GND)
3
+Vout +Vout
4
No pin Common
5
–Vout –Vout
6
Remote On/Off
Pin-Out
Rev. June 27. 2014
Dimensions in [mm], () = Inch
Pin diameter: 1.0 ±0.05 (0.02 ±0.002)
Pin pitsch tolerances: ±0.25 (± 0.01)
Case tolerances: ±0.5 (±0.02)
Note:
Before attaching the heatsink, the product
label on converter has to be removed for
optimal performance.
For volume orders we can supply the
converters with heatsink already mounted.
Please contact us for a relative quotation.
Order code: TEN-HS4
(cont.: heat-sink, thermal pad, 2 clamps)
Material: Aluminum
Finish: Anodic treatment (black)
Weight: 9 g (0.31oz) without converter
Thermal impedance after assembling: 10 K/W
18.0 (0.71)
max.
Converter
Heat-sink
Thermal pad
Clamp
31.0 (1.22) max.
31.1 (1.22)
Heat-sink TEN-HS4 (optional)
Heat-Sink (Option)
Application note: www.tracopower.com/products/ten20-application.pdf