Datasheet

ManualsBrandsTRACOPOWER ManualsPSU ComponentsDC/DC converter (print) 48 Vdc 15 Vdc, -15 Vdc 665 mA 20 W No. of outputs: 2 x

http://www.tracopower.com

Features

◆ High Power Density in 1” x 2”

Metal Package

◆ Ultra wide 4 : 1 Input Range

◆ Extended Operating Temperature Range 

 – 40°C to +85°C max.

◆ No Minimum Load required

◆ I/O-Isolation 1500 VDC

◆ Remote On/Off

◆ Adjustable Output Voltage

◆ Industry Standard Footprint

◆ Shielded Metal Case with insulated

Baseplate

◆ Optional Heatsink

◆ Lead free Design - RoHS compliant

◆ 3 Year Product Warranty

DC/DC Converters

TEN 20WIN Series, 20 Watt

The TEN 20WIN series is a family of high performance 20W DC/DC converter

modules featuring ultra wide 4:1 input voltage ranges in a ultra compact 2“ x 1“

low proﬁle package with industry-standard footprint. A very high efﬁciency al-

lows an operating temperature range of –40°C to 85°C. Further standard features

include remote On/Off, output voltage trimming, over voltage protection and short-

circuit protection.

Typical applications for these converters are battery operated equipment and dis-

tributed power architectures in communication and industrial electronics, every-

where where isolated, tightly regulated voltages are required.

Order code Input voltage range Output voltage Output current max. Efﬁciency typ.

TEN 20-2410WIN

3.3 VDC 5‘500 mA

85 %

TEN 20-2411WIN

5 VDC 4‘000 mA

88 %

TEN 20-2412WIN

12 VDC 1‘670 mA

86 %

TEN 20-2413WIN

9 – 36 VDC

15 VDC 1‘330 mA

86 %

TEN 20-2421WIN

(24 VDC nominal)

± 5 VDC ± 2‘000 mA

88 %

TEN 20-2422WIN

± 12 VDC ± 835 mA

87 %

TEN 20-2423WIN

± 15 VDC ± 665 mA

87 %

TEN 20-4810WIN

3.3 VDC 5‘500 mA

85 %

TEN 20-4811WIN

5 VDC 4‘000 mA

88 %

TEN 20-4812WIN

12 VDC 1‘670 mA

87 %

TEN 20-4813WIN

18 – 75 VDC

VDC 1‘330 mA 87 %

TEN 20-4821WIN

(48 VDC nominal)

± 5 VDC ± 2‘000 mA

89 %

TEN 20-4822WIN

± 12 VDC ± 835 mA

88 %

TEN 20-4823WIN

± 15 VDC ± 665 mA

88 %

Models

Page 1 of 4

RoHS

compliant

pending

Summary of content (4 pages)

PAGE 1
DC/DC Converters TEN 20WIN Series, 20 Watt RoHS compliant pending Features ◆ High Power Density in 1” x 2” Metal Package ◆ Ultra wide 4 : 1 Input Range ◆ Extended Operating Temperature Range – 40°C to +85°C max.
PAGE 2
DC/DC Converters TEN 20WIN 20 Watt Input Specifications Input current at no load 24 Vin models: 50 mA typ. 48 Vin models: 35 mA typ. Input current at full load 24 Vin models: 1000 mA typ. 48 Vin models: 500 mA typ. Surge voltage (100 msec. max.) 24 Vin models: 50 V max. 48 Vin models: 100 V max. Input voltage variation (dv/dt) 5 V / ms, max. (complies to ETS 300 132 part. 4.4) Start-up voltage / under voltage lockout 24 Vin models: 9 VDC / 7.5 VDC typ.
PAGE 3
DC/DC Converters TEN 20WIN 20 Watt General Specifications Reliability, calculated MTBF (MIL-HDBK-217F ground benign) >560’000 h @ + 25 °C Isolation voltage (60 sec.) – Input/Output 1‘500 VDC Isolation capacity – Input/Output 1500 pF max Isolation resistance – Input/Output >1‘000 M Ohm Switching frequency (fixed) 400 kHz typ. (pulse width modulation PWM) Vibration 10-55Hz, 10G, 30 minutes along X,Y,Z Remote On/Off – On: 3.0 ... 12 VDC or open circuit. – Off: 0 ... 1.
PAGE 4
DC/DC Converters TEN 20WIN 20 Watt Physical Specifications Case material copper, nickel plated Baseplate material non conductive FR4 Potting material epoxy (UL 94V-0 - rated) Weight 27 g (0.95 oz) Soldering temperature max. 265 °C / 10 sec. Outline Dimensions 50.8 Pin-Out 5 15.2 (0.80) (0.60) 25.4 (1.00) Pin Single Dual 1 +Vin (Vcc) +Vin (Vcc) 2 –Vin (GND) –Vin (GND) 3 + Vout + Vout 4 Trim Common 5 –Vout –Vout 6 10.2 20.32 6.0 6 (0.24) 4 (0.