Datasheet

J
enatschstrasse 1 · CH-8002 Zurich · Switzerland
Tel. [phone] · Fax [phone] · [e-mail] · www.tracopower.com
Outline Dimensions
Pin Single Dual
1
+Vin (Vcc) +Vin (Vcc)
2
–Vin (GND) –Vin (GND)
3
+ Vout + Vout
4
Trim Common
5
–Vout –Vout
6
Remote On/Off
Pin-Out
Rev. 06/07
Physical Specifications
Case material copper, nickel plated
Baseplate material non conductive FR4
Potting material epoxy
(UL 94V-0 - rated)
Weight 27 g
(0.95 oz)
Soldering temperature max. 265 °C / 10 sec.
Page 4 of 4
DC/DC Converters
TEN 20WIN 20 Watt
Dimensions in [mm], () = Inch
Pin diameter: 1.0 ±0.05 (0.02 ±0.002)
Pin pitch tolerances: ±0.35 (±0.014)
Case tolerances: ±0.5 (±0.02)
Note:
The product label on converter has to be re-
moved before mounting the heat-sink.
For volume orders converters will be supplied
with heat-sinks already mounted. Please con-
tact factory for quotation.
Separate heat-sinks are only available for
prototypes and small quantity orders.
Order code: TEN-HS1
(cont.: heat-sink, thermal pad, 2 clamps)
Material: Aluminum
Finish: Anodic treatment (black)
Weight: 17g (0.60oz) without converter
Thermal impedance after assembling: 10 K/W
56.0 (2.2) max.
14.5 (0.57)
16.8 (0.66)
max.
Converter
Heat-sink
Thermal pad
Clamp
Insulated baseplate
Bottom View
1
4
3
2
5
6
50.8
(2.0)
15.2
(0.60)
20.32
(0.80)
5.08
(0.20)
7.62
(0.30)
2.5
(0.10)
10.16
(0.40)
10.16
(0.40)
25.4
(1.00)
10.2
(0.40)
6.0
(0.24)
7.62
(0.30)
Specifications can be changed any time without notice
Heat-Sink (Option)