Datasheet

http://www.tracopower.com Page 3 of 4
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
DC/DC Converters
TEN 3N Series 3 Watt
Output Specifications (continued)
Capacitive load 3.3 VDC models: 680 µF max.
5.0 VDC models: 470 µF max.
12 VDC models: 330 µF max.
15 VDC models: 220 µF max.
24 VDC models: 100 µF max.
±5.0 VDC models: 220 µF max (each output)
±12 VDC models: 150 µF max. (each output)
±15 VDC models: 100 µF max. (each output)
General Specifications
Temperature ranges – Operating (natural convection cooling 20 LFM) –40°C to +85°C
– Case temperature +100°C max.
– Storage –55°C to +125°C
Derating 3.3 %/K above 70°C
Humidity (non condensing) 95 % rel H max.
Reliability, calculated MTBF (MIL-HDBK-217 F, at +25°C, ground benign) >1 Mio. h
Isolation voltage (60 sec.) – Input/Output 1’500 VDC or 3‘000 VDC
Isolation capacitance – Input/Output 300 pF max.
Isolation resistance – Input/Output (500 VDC) >1‘000 M Ohm
Switching frequency 90 kHz min. (pulse frequency modulation PFM)
Safety standards cUL/UL 60950-1, IEC/EN 60950-1
Safety approvals – CSA certificate of compliance CAN/CSA-C22.2 No 60950-1-07, Am 1:2011
ANSI/UL Std No 60950-1, 2nd Ed, AM 1:2011
– CB test certificate IEC 60950-1:2005 2nd Ed, Am 1:2009
– Certification documents www.tracopower.com/overview/ten3n
Environmental compliance – Reach www.tracopower.com/overview/ten3n
– RoHS RoHS directive 2011/65/EU
Application note: www.tracopower.com/products/ten3n-application.pdf
Pending