Datasheet

ManualsBrandsTRACOPOWER ManualsPSU ComponentsDC/DC converter (car) 12 Vdc 12 Vdc 2.5 A 30 W No. of outputs: 1 x

http://www.tracopower.com Page 1 of 4

Features

◆ Smallest encapsulated 30 W converter

◆ 2’’ x 1’’ x 0.4’’ shielded metal package

with isolated baseplate

◆ Single- and dual output models

◆ I/O isolation voltage 1500 VDC

◆ Excellent efﬁciency up to 91 %

◆ Operating temp. range –40°C to +85°C

◆ Remote On/Off

◆ Over-temperature protection

◆ 3-year product warranty

DC/DC Converters

TEN 30 Series, 30 Watt

The TEN-30 series is the latest generation of high performance dc-dc converter

modules setting a new standard concerning power density. This product with

30W comes in an encapsulated, shielded metal package with a footprint of only

1.0” x 2.0”. All models have wide 2:1 input voltage range and precisely regulated,

isolated output voltages. Advanced circuit topology provides high efﬁciency up to

91% which allows an industrial operating temperature range of –40°C to +85°C

(with derating).

Further features include remote On/Off, trimmable output, under-voltage lockout

and overtemperature protection. Typical applications for these converters are mo-

bile equipment, instrumentation, distributed power architectures in communication

and industrial electronics and everywhere where space on the PCB is critical.

Ordercode Input voltage Output voltage Output current max. Efﬁciency typ.

TEN 30-1207

1.5 VDC 8‘500 mA 79 %

TEN 30-1209

2.5 VDC 8‘000 mA 84 %

TEN 30-1210

3.3 VDC 8‘000 mA 85 %

TEN 30-1211

9 – 18 VDC

5.1 VDC 6‘000 mA 87 %

TEN 30-1212

(nominal 12 VDC)

12 VDC 2‘500 mA 89 %

TEN 30-1213

15 VDC 2‘000 mA 89 %

TEN 30-1221

± 5 VDC ± 3‘000 mA 87 %

TEN 30-1222

± 12 VDC ± 1‘250 mA 87 %

TEN 30-1223

± 15 VDC ± 1‘000 mA 87 %

TEN 30-2407

1.5 VDC 8‘500 mA 80 %

TEN 30-2409

2.5 VDC 8‘000 mA 85 %

TEN 30-2410

3.3 VDC 8’000 mA 87 %

TEN 30-2411

18 – 36 VDC

5.1 VDC 6‘000 mA 90 %

TEN 30-2412

(nominal 24 VDC)

12 VDC 2‘500 mA 91 %

TEN 30-2413

15 VDC 2‘000 mA 91 %

TEN 30-2421

± 5 VDC ± 3‘000 mA 90 %

TEN 30-2422

± 12 VDC ± 1‘250 mA 89 %

TEN 30-2423

± 15 VDC ± 1‘000 mA 90 %

TEN 30-4807

1.5 VDC 8‘500 mA 80 %

TEN 30-4809

2.5 VDC 8‘000 mA 85 %

TEN 30-4810

3.3 VDC 7‘500 mA 87 %

TEN 30-4811

36 – 75 VDC

5.1 VDC 6‘000 mA 89 %

TEN 30-4812

(nominal 48 VDC)

12 VDC 2‘5000 mA 91 %

TEN 30-4813

15 VDC 2‘000 mA 91 %

TEN 30-4821

± 5 VDC ± 3‘000 mA 90 %

TEN 30-4822

± 12 VDC ± 1‘250 mA 88 %

TEN 30-4823

± 15 VDC ± 1‘000 mA 89 %

Models

UL 60950-1

Summary of content (4 pages)

PAGE 1
DC/DC Converters TEN 30 Series, 30 Watt Features ◆ Smallest encapsulated 30 W converter ◆ 2’’ x 1’’ x 0.4’’ shielded metal package UL 60950-1 with isolated baseplate ◆ ◆ ◆ ◆ ◆ ◆ ◆ Single- and dual output models I/O isolation voltage 1500 VDC Excellent efficiency up to 91 % Operating temp.
PAGE 2
DC/DC Converters TEN 30 Series, 30 Watt Input Specifications Input current at no load 12 V; ±12 / ±15 Vout 12 V; other 24 V; 12 / 15 Vout 24 V; ±12 / ±15 Vout 24 V; other 48 V; ±12 / ±15 Vout 48 V; other models: models: models: models: models: models: models: 50 mA max. 100 mA max. 30 mA max. 30 mA max. 70 mA max. 30 mA max. 45 mA max. Input current at full load 12 V;.1.5 Vout 12 V;.2.5 Vout 12 V;.3.3 Vout 12 V; other output 24 V;.1.
PAGE 3
DC/DC Converters TEN 30 Series, 30 Watt General Specifications Capacitive load Temperature ranges 1.5 / 2.5 / 3.3 5.1 12 15 ±5 ±12 ±15 Vout Vout Vout Vout Vout Vout Vout models: models: models: models: models: models: models: 20’000 µF 14’400 µF 3’000 µF 2’000 µF ±3’000 µF ±2’000 µF ±1’300 µF – Operating – 40°C to +85°C – Case temperature +100°C max. – Storage – 55°C to +125°C Load derating 3.3 %/K above 60°C Humidity (non condensing) 5 % to 95 % rel H max.
PAGE 4
DC/DC Converters TEN 30 Series, 30 Watt Outline Dimensions 15.24 (0.6) 5.08 (0.2) Pin-Out 2.54 (0.1) 2.5 (0.1) 50.8 (2.0) 45.72 (1.8) 3 5.6 5 4 (0.4) 20.32 Single Dual 1 +Vin (Vcc) +Vin (Vcc) 2 –Vin (GND) –Vin (GND) Remote On/Off 4 + Vout + Vout 5 –Vout Common 6 Trim –Vout Dimensions in [mm], () = Inch Pin diameter: 1.0 ±0.1 (0.04 ±0.004) Pin pitch tolerances: ±0.25 (±0.01) Case tolerances: ±0.5 (±0.02) 10.16 10.2 Pin 3 Bottom View 6 (0.22) 2 1 (0.4) (0.