Datasheet

http://www.tracopower.com Page 2 of 4
Input Specifications
Input current at no load 12 V; ±12 / ±15 Vout models: 50 mA max.
12 V; other models: 100 mA max.
24 V; 12 / 15 Vout models: 30 mA max.
24 V; ±12 / ±15 Vout models: 30 mA max.
24 V; other models: 70 mA max.
48 V; ±12 / ±15 Vout models: 30 mA max.
48 V; other models: 45 mA max.
Input current at full load 12 V;.1.5 Vout models: 1400 mA typ.
12 V;.2.5 Vout models: 2100 mA typ.
12 V;.3.3 Vout models: 2700 mA typ.
12 V; other output models: 3000 mA typ.
24 V;.1.5 Vout models: 700 mA typ.
24 V;.2.5 Vout models: 1000 mA typ.
24 V;.3.3 Vout models: 1300 mA typ.
24 V; other output models: 1500 mA typ.
48 V;.1.5 Vout models: 350 mA typ.
48 V;.2.5 Vout models: 500 mA typ.
48 V;.3.3 Vout models: 650 mA typ.
48 V; other output models: 750 mA typ.
Start-up voltage / 12 V models: 9 VDC / 8 VDC typ.
under voltage shut down 24 V models: 18 VDC / 16 VDC typ.
48 V models: 36 VDC / 32 VDC typ.
Surge voltage (100 msec. max.) 12 V models: 25 V max.
24 V models: 50 V max..
48 V models: 100 V max.
Conducted noise (input) EN 55022 class A with input capacitor
12 V models: 10 µF / 25 V 1812 MLCC
24 V models: 4.7 µF / 50 V 1812 MLCC
48 V models: 2.2 µF / 100 V 1812 MLCC
Output Specifications
Voltage set accuracy ±1 %
Output voltage adj. range ±10 % (only for single output models)
Regulation – Input variation Vin min. to Vin max. 0.2 % max.
– Load variation 0 – 100 %
– single output models 0.5 % max.
– dual output models balanced load 1.0 % max.
– dual output models unbalanced load (25% /100%) 5.0 % max.
Minimum load not required
Temperature coefficient ±0.02 %/K
Ripple and noise (20 MHz Bandwidth) 100 mVpk-pk max.
(150 mVpk-pk for 12/±12/15/±15V models)
Start up time (nominal Vin and constant resistive load) 30 ms typ.
Transient response time (25% load change) 250 µs typ.
Short circuit protection indefinite, automatic recovery
Over load protection 150 % of Iout max. typ.
Thermal shutdown @ 115°C typ.
Over voltage protection 1.5 VDC models: 2.0 V
2.5 VDC models: 3.3 V
3.3 VDC models: 3.9 V
5.1 VDC models: 6.2 V
12 VDC models: 15 V
15 VDC models: 18 V
DC/DC Converters
TEN 30 Series, 30 Watt
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.