Datasheet

ManualsBrandsTRACOPOWER ManualsPSU ComponentsDC/DC converter (print) 24 Vdc 2000 mA 30 W No. of outputs: 1 x

http://w ww.tracopower.com

Features

◆

Ultra wide 4:1 input voltage range

◆ Single output voltage models

from 1.8 to 15 VDC

◆ Dual output voltage models

◆ Extended operating temperature range:

–40°C to 85°C

◆ Under voltage lockout

◆ Remote On/Off

◆ Shielded metal case with insulated

baseplate

◆ Optional heatsink

◆ Lead free design - RoHS compliant

◆ 3-year product warranty

DC/DC Converters

TEN 30WI Series, 30 Watt

The TEN 30WI series is a family of high performance 30W dc-dc converters fea-

turing ultra wide 4:1 input voltage ranges in a compact low proﬁle package with

industry-standard footprint. A very high efﬁciency allows operating temperatures

up to 85°C. A built-in ﬁlter for both input and output minimizes the need for external

ﬁltering. Further standard features include remote On/Off, output voltage trimming,

over voltage protection, under voltage lockout and short circuit protection.

Typical applications for these products are battery operated equipment and distrib-

uted power architectures in communication and industrial electronics, everywhere

where isolated, tightly regulated voltages are required and space is limited on the

PCB.

Order code Input voltage range Output voltage Output current max. Efﬁciency typ.

TEN 30-2408WI

1.8 VDC 8‘000 mA 80 %

TEN 30-2409WI

2.5 VDC 8’000 mA 85 %

TEN 30-2410WI

3.3 VDC 6’000 mA 87 %

TEN 30-2411WI 10 – 40 VDC

5.0 VDC 6‘000 mA 87 %

TEN 30-2412WI

(nominal 24 VDC)

12 VDC 2’500 mA 87 %

TEN 30-2413WI

15 VDC 2’000 mA 88 %

TEN 30-2422WI

±12 VDC ±1’250 mA 85 %

TEN 30-2423WI

±15 VDC ±1’000 mA 86 %

TEN 30-4808WI

1.8 VDC 8‘000 mA 81 %

TEN 30-4809WI

2.5 VDC 8’000 mA 86 %

TEN 30-4810WI

3.3 VDC 6’000 mA 87 %

TEN 30-4811WI 18 – 75 VDC

5.0 VDC 6‘000 mA 88 %

TEN 30-4812WI

(nominal 48 VDC)

12 VDC 2’500 mA 87 %

TEN 30-4813WI

15 VDC 2’000 mA 88 %

TEN 30-4822WI

±12 VDC ±1’250 mA 86 %

TEN 30-4823WI

±15 VDC ±1’000 mA 87 %

Models

Page 1 of 4

Summary of content (4 pages)

PAGE 1
DC/DC Converters TEN 30WI Series, 30 Watt Features ◆ Ultra wide 4:1 input voltage range ◆ Single output voltage models from 1.
PAGE 2
DC/DC Converters TEN 30WI 30 Watt Input Specifications Input current at no load (nominal input 24/48 Vin) 1.8 Vout models: 35 / 20 mA typ. 2.5/3.3 Vout models: 40 / 25 mA typ. other models: 70 / 45 mA typ. Input current at full load (nominal input 24/48 Vin) 1.8 Vout models: 760 / 380 mA typ. 2.5/3.3 Vout models: 1030 / 510 mA typ. other models: 1500 / 750 mA typ. Input voltage variation (dv/dt) 5 V/ms, max. (complies with ETS 300 132 part. 4.
PAGE 3
DC/DC Converters TEN 30WI 30 Watt General Specifications Temperature ranges – Operating –40°C to +85°C – Case temperature +100°C max. – Storage –55°C to +105°C Thermal impedance – with heat-sink TEN-HS2 8.24 K/Watt – without heat-sink 10 K/Watt www.tracopower.com/products/ten30wi-derating.pdf Derating Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >750’000 h Isolation voltage (60sec.
PAGE 4
DC/DC Converters TEN 30WI 30 Watt Physical Specifications Casing material copper, nickel plated Baseplate material none conductive FR4 Potting material epoxy (UL 94V-0 -rated) Weight 48 g (1.69 oz) Soldering temperature max. 265°C / 10 sec. 4 45.72 (1.8) (0.22) (0.4) (0.5) 12.7 (0.4) 2 1 (0.2) 5 Bottom view Pin-Out 10.16 6 3 5.08 (0.4) (0.4) (0.4) 7 (0.2) 5.1 5.6 10.2 10.16 10.16 10.16 40.6 (1.