Datasheet

http://w ww.tracopower.com
DC/DC Converters
TEN 30WIN 30 Watt
General Specifications
Temperature ranges – Operating –40°C to +75°C
– Case temperature +105°C max.
– Storage –55°C to +125°C
Derating 3.5 %/K above +60°C
Humidity (non condensing) 95 % rel. H max.
Thermal inpedance – Natural convection 12°C/W
– Natural convection with heat sink 10°C/W
Reliability, calculated MTBF single- and dual output models: 1.2 Mio. h
(MIL-HDBK-217F, at +70°C, ground benign)
triple output models: 1.1 Mio. h
Isolation voltage (60 sec.) – Input / Output 1500 VDC
Isolation resistance – Input / Output >1000 M Ohm
Isolation capacitance – Input / Output 1500 pF max.
Remote On/Off – On: 3.0 to 12 VDC or open circuit.
– Off: 0 to 1.2 VDC or short circuit pin 3 and pin 2
– Off idle current: 3 mA max.
Switching frequency (pulse width modulation PWM) single- and dual output models: 430 kHz typ.
triple output models: 400 kHz typ.
Thermal shock, mechanical shock & vibration EN 61373, MIL-STD-810F
– Test conditions www.tracopower.com/products/mil810.pdf
Safety standards UL 60950-1, IEC/EN 60950-1
Safety approvals – UL/cUL www.ul.com -> certifications -> File e188913
Output Voltage Adjustment (for single output models only)
Rd
Trim
+Vout
Ru
Trim
- Vout
Trim up Trim down
Page 3 of 4
Nominal output voltage at open Trim input!
Physical Specifications
Casing material copper, nickel plated
Baseplate material none conductive FR4
Potting material epoxy (UL 94V-0 -rated)
Weight 31 g (1.1oz )
Soldering temperature max. 265°C / 10 sec.
Environmental compliance – Reach www.tracopower.com/overview/ten30win
– RoHS RoHS Directive 2011/65/EU
Ru [kohm]
output 1.5 2.5 3.3V 5.1V 12V 15V
+5% 0.56 4.3 6.8 5.1 43 47
+10% 0.051 0.33 0.75 0.75 4.3 1.8
Rd [kohm]
output 1.5 2.5 3.3V 5.1V 12V 15V
–5% 0.68 6.2 8.2 6.2 56 56
–10% 0.062 0.75 0.62 0.82 5.6 2.2
Application note: www.tracopower.com/products/ten30win-application.pdf