Datasheet

ManualsBrandsTRACOPOWER ManualsPSU ComponentsDC/DC converter (print) 48 Vdc 10000 mA 40 W No. of outputs: 1 x

http://w ww.tracopower.com

Features

◆

High power density: 40W in

2”x2”x0.4” metal package

◆ Ultra wide 4:1 input voltage range

◆ Very high efﬁciency up to 87 %

◆ No minimum load required for

single output models

◆ Over temperature protection

◆ Under voltage lockout

◆ Remote On/Off

◆ Shielded metal case with insulated

baseplate

◆ Optional heat-sink

◆ 3-year product warranty

DC/DC Converters

TEN 40WI Series, 40 Watt

The TEN 40WI series is a family of high performance 40W dc-dc converter modules

featuring ultra wide 4:1 input voltage ranges in a compact low proﬁle case with

industry-standard footprint. A very high efﬁciency allows an operating temperature

range of –40°C to 85°C. Further standard features include remote On/Off, output

voltage trimming, over voltage protection, under voltage lockout, over temperature

and short circuit protection.

Typical applications for these products are battery operated equipment and distrib-

uted power architectures in communication and industrial electronics, everywhere

where isolated, tightly regulated voltages are required and space is limited on the

PCB.

Page 1 of 4

Ordercode Input voltage range Output voltage Output current max. Efﬁciency typ.

TEN 40-2410WI

3.3 VDC 10.0 A 86 %

TEN 40-2411WI

5.0 VDC 8.0 A 87 %

TEN 40-2412WI 9 – 36 VDC

12 VDC 3.35 A 87 %

TEN 40-2413WI

(24 VDC nominal)

15 VDC 2.65 A 87 %

TEN 40-2422WI

±12 VDC ±1.65 A 86 %

TEN 40-2423WI

±15 VDC ±1.35 A 86 %

TEN 40-4810WI

3.3 VDC 10.0 A 86 %

TEN 40-4811WI

5.0 VDC 8.0 A 88 %

TEN 40-4812WI 18 – 75 VDC

12 VDC 3.35 A 87 %

TEN 40-4813WI

(48 VDC nominal)

15 VDC 2.65 A 87 %

TEN 40-4822WI

±12 VDC ±1.65 A 86 %

TEN 40-4823WI

±15 VDC ±1.35 A 86 %

Models

UL 60950-1

Summary of content (4 pages)

PAGE 1
DC/DC Converters TEN 40WI Series, 40 Watt UL 60950-1 Features ◆ High power density: 40W in 2”x2”x0.
PAGE 2
DC/DC Converters TEN 40WI 40 Watt Input Specifications Input current (no load) 24 Vin single output models: 100 mA typ 48 Vin single output models: 60 mA typ . dual putput models: 30 mA typ Input current (full load) (nominal input 24/48 VDC) 3.3 VDC models: 1680 / 840 mA typ. other models: 2000 / 1000 mA typ. Input voltage variation (dv/dt) 5 V/ms, max. (complies with ETS300 132 part 4.4) Start-up voltage / under voltage lockout 24 Vin models: 9 VDC / 8 VDC (typ.
PAGE 3
DC/DC Converters TEN 40WI 40 Watt General Specifications Temperature ranges – Operating –40°C to +85°C – Case temperature +105°C max. – Storage –55°C to +125°C Derating see application note Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >660’000 h Isolation voltage (60 sec.) – Input / Output 1‘500 VDC Isolation resistance – Input / Output >1‘000 M Ohm Isolation capacitance – Input / Output 2500 pF max.
PAGE 4
DC/DC Converters TEN 40WI 40 Watt 5.08 (0.2) 3 Bottom 5 view 4 45.72 (1.8) 10.2 50.8 (2.0) (0.4) Dual +Vin (Vcc) +Vin (Vcc) 2 –Vin (GND) –Vin (GND) Remote On/Off 4 – Sense* + Vout 5 + Sense* Common 6 + Vout Common 7 – Vout – Vout 8 Dimensions in [mm], () = Inch Pin diameter: 1.0 ±0.05 (0.04 ±0.002) Pin pitch tolerances: ±0.35 (±0.014) Case tolerances: ±0.5 (±0.02) Single 1 3 5.6 (0.22) 2 1 Pin (0.2) 6 (0.4) 7 27.9 (1.10) Pin-Out 8 5.08 10.16 50.8 (2.0) (0.3) (0.