Datasheet

ManualsBrandsTRACOPOWER ManualsPSU ComponentsDC/DC converter (print) 12 Vdc 3330 mA 50 W No. of outputs: 1 x

http://www.tracopower.com

DC/DC Converters

TEN 50 Series, 50 Watt

Features

◆

Highest power density:

50 W in 1” x 2” x 0.4” package

◆ Excellent efﬁciency up to 92 %

◆ Operating temperature range

–40°C to +85°C

◆ No minimum load required

◆ Output voltage adjustable

◆ Remote On/Off

◆ I/O isolation 1500 VDC

◆ 3-year product warranty

The TEN 50 Series is a range of isolated high performance dc-dc converter mod-

ules. Due to the very high efﬁciency of up to 92% and the use of highest reli-

able components these 50 W converters come with a footprint of only 1.0” x

2.0”. The 12 models have a wide 2:1 input voltage range and a tight output volt-

age regulation. They do not need a minimum load and a offer a high efﬁciency

also at low load conditions. The output voltage is adjustable by external resistor.

Remote On/Off and protection against overload and short circuit are standard

features of these converters.

Typical applications are in mobile equipment, instrumentation, distributed power

architectures in communication and industrial electronics and everywhere where

space on the PCB is critical.

Order code Input voltage range Output voltage Output current max. Efﬁciency

TEN 50-1210

3.3 VDC 10‘000 mA 89 %

TEN 50-1211

9 – 18 VDC

5.0 VDC 10’000 mA 90 %

TEN 50-1212

(nominal 12 VDC)

12 VDC 4‘170 mA 91 %

TEN 50-1213

15 VDC 3‘330 mA 91 %

TEN 50-1215

24 VDC 2‘080 mA 91 %

TEN 50-2410

3.3 VDC 10‘000 mA 89 %

TEN 50-2411

18 – 36 VDC

5.0 VDC 10’000 mA 92 %

TEN 50-2412

(nominal 24 VDC)

12 VDC 4‘170 mA 92 %

TEN 50-2413

15 VDC 3‘330 mA 92 %

TEN 50-2415

24 VDC 2‘080 mA 91 %

TEN 50-4810

3.3 VDC 10‘000 mA 89 %

TEN 50-4811

36 – 75 VDC

5.0 VDC 10’000 mA 92 %

TEN 50-4812

(nominal 48 VDC)

12 VDC 4‘170 mA 92 %

TEN 50-4813

15 VDC 3‘330 mA 92 %

TEN 50-4815

24 VDC 2‘080 mA 91 %

Models

Page 1 of 4

C B

Scheme

Summary of content (4 pages)

PAGE 1
DC/DC Converters TEN 50 Series, 50 Watt CB Features ◆ Highest power density: Scheme 50 W in 1” x 2” x 0.4” package ◆ Excellent efficiency up to 92 % ◆ Operating temperature range –40°C to +85°C ◆ ◆ ◆ ◆ ◆ No minimum load required Output voltage adjustable Remote On/Off I/O isolation 1500 VDC 3-year product warranty The TEN 50 Series is a range of isolated high performance dc-dc converter modules.
PAGE 2
DC/DC Converters TEN 50 Series 50 Watt Input Specifications Input current at no load 12 V; 3.3 & 5.0 VDC (nominal input voltage) 12 V; 12 & 15 VDC 12 V; 24 VDC 24 V; 3.3 & 5.0 VDC 24 V; 12 & 15 VDC output 24 V; 24 VDC 48 V; 3.3 & 5.0 VDC 48 V; 12 & 15 VDC 48 V; 24 VDC models: models: models: models: models: models: models: models: models: 85 mA typ. / 110 mA typ. 160 mA typ. 250 mA typ. 50 mA typ. / 70 mA typ. 85 mA typ. 110 mA typ. 35 mA typ. / 45 mA typ. 50 mA typ. 60 mA typ.
PAGE 3
DC/DC Converters TEN 50 Series 50 Watt General Specifications Temperature ranges – Operating (natural convection cooling 20 LFM) –40°C to +85°C (see load derating) – Case temperature +105°C max. – Storage –50°C to +125°C Load derating – without heatsink – with heatsink Thermal impedance – Natural convection 20 LFM 12°C/W – Natural convection 20 LFM with heatsink 10°C/W 1.1 %/K above 50°C 1.3 %/K above 60°C Humidity (non condensing) 95 % rel H max.
PAGE 4
DC/DC Converters TEN 50 Series 50 Watt 3 5 6 5.5 (0.22) (0.43) 2.54 (0.1) 11.0 45.72 (1.8) Pin-Out 25.4 (1.0) 2.54 Bottom View (0.8) 4 (0.4) 1 2 20.32 (0.1) (2.0) 10.16 (0.4) (0.2) 10.16 5.08 2.54 50.8 (0.1) Outline Dimensions Heat-sink TEN-HS4 (optional) Pin Single 1 +Vin (Vcc) 2 –Vin (GND) 3 Remote On/Off 4 +Vout 5 –Vout 6 Trim Dimensions in [mm], () = Inch Pin diameter: 1.0 ±0.05 (0.04 ±0.002) Pin pitch tolerance: ±0.13 (±0.005) Case tolerances: ±0.25 (±0.