Datasheet

Page 3 of 3
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
www.tracopower.com
DC/DC Converters
TEN 6N Series 6 Watt
Outline Dimensions
Pin Single Dual
2
–Vin (GND) –Vin (GND)
3
–Vin (GND) –Vin (GND)
9
No pin Common
11
No function –Vout
14
+Vout +Vout
16
–Vout Common
22
+Vin (Vcc) +Vin (Vcc)
23
+Vin (Vcc) +Vin (Vcc)
Pin-Out
Rev. July 14. 2015
General Specifications
Safety standards UL/cUL 60950-1, IEC/EN 60950-1
– Certification documents www.tracopower.com/overview/ten6n
Environmental compliance – Reach www.tracopower.com/overview/ten6n
– RoHS RoHS directive 2011/65/EU
Physical Specifications
Casing material non conductive plastic (UL 94V-0-rated)
Potting material epoxy (XM-2109 & XY-2110, UL 94V-0-rated)
Weight 13.0 g (0.46 oz)
Soldering temperature (1.5mm from case for 10 sec.) max. 260°C
911
2223
23
16 14
Bottom view
15.24
2.54
20.3
(0.10)
(0.60)
(0.80)
10.2
(0.40)4.1
(0.16)
2.54 15.24 5.08
4.5
31.8
(0.10)
(0.60)
(0.20)
(0.18)
(1.25)
Dimensions in [mm], () = Inch
Pin diameter ø 0.5 ±0.05 (0.02 ±0.002)
Tolerances ±0.25 (±0.01)
Pin pich tolerances ±0.13 (±0.0005)
Application note: www.tracopower.com/products/ten6n-application.pdf