Datasheet

ManualsBrandsTRACOPOWER ManualsPSU ComponentsDC/DC converter (print) TEN 60 Series 24 Vdc 3.3 Vdc 14 A 60 W No. of outputs: 1 x

http://www.tracopower.com

Features

◆ Highest power density: 60W in a

51x51x10mm (2”x2”x0.4”) package

◆ Wide 2:1 input voltage range

◆ Very high efﬁciency up to 90%

◆ No minimum load required

◆ Over temperature protection

◆ Under voltage lockout

◆ Remote On/Off

◆ Shielded metal case with insulated

baseplate

◆ Optional heatsink

◆ Lead free design - RoHS compliant

◆ 3-year product warranty

DC/DC Converters

TEN 60 Series, 60 Watt

The TEN 60 series is a family of high performance 60W dc-dc converter modules with

wide 2:1 input voltage ranges in a compact low proﬁle case with industry-standard

footprint. A very high efﬁciency allows an operating temperature range of –40°C to

85°C. Built-in ﬁlters for both input and output minimizes the need for external ﬁltering.

Further standard features include remote On/Off, output voltage trimming, over volt-

age protection, under voltage lockout and short circuit protection.

Typical applications for these products are battery operated equipment and distributed

power architectures in communication and industrial electronics, everywhere where

isolated, tightly regulated voltages are required and space is limited on the PCB.

Page 1 of 4

Order code Input voltage range Output voltage Output current max. Efﬁciency typ.

TEN 60-2410

3.3 VDC 14.0 A 89 %

TEN 60-2411 18 – 36 VDC

5.0 VDC 12.0 A 90 %

TEN 60-2412

(24 VDC nominal)

12 VDC 5.0 A 90 %

TEN 60-2413

15 VDC 4.0 A 90 %

TEN 60-4810

3.3 VDC 14.0 A 89 %

TEN 60-4811 36 – 75 VDC

5.0 VDC 12.0 A 90 %

TEN 60-4812

(48 VDC nominal)

12 VDC 5.0 A 90 %

TEN 60-4813

15 VDC 4.0 A 90 %

Models

Summary of content (4 pages)

PAGE 1
DC/DC Converters TEN 60 Series, 60 Watt Features ◆ Highest power density: 60W in a 51x51x10mm (2”x2”x0.
PAGE 2
DC/DC Converters TEN 60 60 Watt Input Specifications Input current at no load Input current at full load (nominal input 24/48 Vin) 24 V models: 120 mA typ. 48 V models: 100 mA typ. 3.3 V output models: 2250 /1150 mA typ. 5.0V models: 2850 /1450 mA typ. 12V & 15 V output models: 2900 /1450 mA typ. Input voltage variation (dv/dt) 5 V/ms, max. (complies with ETS300 132 part 4.4) Start-up voltage / under voltage lockout 24 Vin models: 17 VDC / 15 VDC typ.
PAGE 3
DC/DC Converters TEN 60 60 Watt General Specifications Isolation (Input/Output) – Voltage 1‘500 VDC – Capacity 1’500 pF max. – Resistance >1‘000 MOhm Remote On/Off – On: 3.0 ... 12 VDC or open circuit. – Off: 0 ... 1.2 VDC or short circuit pin 3 and pin 2 – Off idle current: 3.0 mA max. Switching frequency (fixed) 300 kHz typ.
PAGE 4
DC/DC Converters TEN 60 60 Watt Outline Dimensions Heat-sink TEN-HS3 56.0 (2.2) max. Heat-sink Thermal pad Clamp Converter 14.5 (0.57) 17.0 (0.67) max. Order code: Material: Finish: Weight: TEN-HS3 (cont.: heat-sink, thermal pad, 2 clamps) Aluminum Anodic treatment (black) 22 g (0.78oz) (without converter) Note: The product label on converter has to be removed before mounting the heat-sink. For volume orders converters will be supplied with heatsinks already mounted.