Datasheet

ManualsBrandsTRACOPOWER ManualsPSU ComponentsDC/DC converter (print) 24 Vdc 10000 mA 160 W No. of outputs: 1 x

http://w ww.tracopower.com Page 1 of 4

DC/DC Converters

TEP 160 Series, 150 – 196 Watt

Features

◆

Compact metal package

◆ Wide 2:1 input voltage ranges

16.5–36, 33–75 VDC

◆ Very high efﬁciency up to 93%

◆ No minimum load

◆ Soft start

◆ Ajustable output voltage +10/-20%

◆ Sense line

◆ Remote On/Off input

◆ Reverse input voltage protection

◆ Over temperature protection

◆ Optional Heatsink

◆ 3-year product warranty

The TEP 160 Series is a family of isolated high performance dc-dc converter modules

with wide 2:1 input voltage ranges which come in a rugged, sealed industry stan-

dard half brick package.

A very high efﬁciency allows full power operation without forced air cooling at 25°C

This temperature can be increased to 40°C with optional mounted heatsink or up

to 60°C when mounted on an iron base plate. The very wide input voltage range

and reverse input voltage protection make these converters interesting solution for

battery operated systems. Typical applications are in telecom/datacom, industry

control and railway systems for on board power distribution.

These series is available in many optional designs on demand --> see options.

Order code Input voltage Output voltage Output current max. Efﬁciency typ.

TEP 160-2412

12 VDC 13 A 92 %

TEP 160-2413

16.5 – 36 VDC

15 VDC 10 A 92 %

TEP 160-2415

(24 VDC nominal)

24 VDC 6.5 A 93 %

TEP 160-2416

28 VDC 5.5 A 93 %

TEP 160-2418

48 VDC 3.3 A 92 %

TEP 160-4812

12 VDC 16 A 92 %

TEP 160-4813

15 VDC 13 A 93 %

TEP 160-4815 33 – 75 VDC

24 VDC 8 A 92 %

TEP 160-4816

(48 VDC nominal)

28 VDC 7 A 92 %

TEP 160-4818

48 VDC 4 A 92 %

TEP 160-48153

53 VDC 3.7 A 92 %

Standard Models

(Models pictured with optional heatsink)

TEP-HS1

Heat-sink for standard version (incl. mounting screws and thermal pad)

TCK-xxx

Common mode chokes for ﬁlter proposals to meet EN55022 class A/B --> see application note

on demand

Models with 3.3 VDC/~ 40 A or 5.0 VDC/~ 30 A output

Negative (passive = Off) Remote On/Off function (standard is passive = On)

Sync pin to synchronize switching frequency of up to 3 units (EMC reason)

Options

Summary of content (4 pages)

PAGE 1
DC/DC Converters TEP 160 Series, 150 – 196 Watt Features ◆ Compact metal package ◆ Wide 2:1 input voltage ranges 16.
PAGE 2
DC/DC Converters TEP 160 Series 150 – 196 Watt Input Specifications Input current at no load (nominal input voltage) 24 V models: 35 mA typ. 48 V models: 25 mA typ. Start-up voltage 24 V models: 18 VDC max. 48 V models: 34 VDC max. Under voltage shut down 24 V models: 15.5 – 16.3 VDC 48 V models: 31.6 – 32.5 VDC Surge voltage (1 sec. max.
PAGE 3
DC/DC Converters TEP 160 Series 150 – 196 Watt General Specifications Temperature ranges – Operating –40°C to +75°C – Case temperature +115°C max. – Storage –55°C to +125°C Thermal impedance – without heat-sink 6.1°C/W – with heat-sink 5.1°C/W Power derating – without heat-sink – with heat-sink – with iron base plate (19” x 3.5” x 0.063”) depending on installation! 1.5 %/K above +25°C 1.5 %/K above +40°C 1.
PAGE 4
DC/DC Converters TEP 160 Series 150 – 196 Watt Dimensions TEP 160 module Pin-Out 5 1 – Vin 2 6 2 Case 7 3 Remote On/Off 4 + Vin 5 – Vout 6 – Sense* 7 Trim 8 + Sense* 9 + Vout 4 9 1.90 (48.26) Pin diameter pin 5 & 9: 0.08 (2.0) Pin diameter other pins: 0.04 (1.0) (0.6) 0.023 0.5 (12.7) 2.28 (57.9) (5.1) 1.00 (25.40) 8 0.70 (17.78) 3 0.30 Bottom view 0.19 (4.8) 0.20 Pin 1 (7.62) 2.40 (61.0) 2.00 (50.80) 4 x M3 THD (trough hole) Weight: 105g (3.