Datasheet

TEP 75WI Series
Application Note
http://www.tracopower.com Page 55 of 69
Output Voltage Adjustment
Output voltage is adjustable for 10% trim up or -20% trim down of nominal output voltage by connecting an external
resistor between the TRIM pin and either the +SENSE or -SENSE pins. With an external resistor between the TRIM
and -SENSE pin, the output voltage set point decreases. With an external resistor between the TRIM and +SENSE pin,
the output voltage set point increases. Maximum output deviation is +10% inclusive of remote sense. (Please refer to
page 57, remote sense) The value of external resistor can be obtained by equation or trim table shown in next page.
The external TRIM resistor needs to be at least 1/8W resistors.
TRIM UP TRIM DOWN