Datasheet

TEP 75WI Series
Application Note
http://www.tracopower.com Page 64 of 69
Mechanical Data Of The Terminal Block Type (continued)
1.27
0.68
(32.3)
(17.3)
1.47
0.68
(37.3)
(17.3)
1.60 (40.6)
3.35
3.071
(85.0)
(78.0)
2.40
2.126
(61.0)
(54.0)
0.14
(3.5)
0.14
(3.5)
4 x Ø0.17 (4.3)
2.00
(50.8)
0.89 (22.2)
TEP 75 module with chassis mount adabtor
For easy chassis mounting the converter modules can be supplied with an adaptor option consisting of a screw terminal connection
board (soldered to converter pins) and a chassis mount adaptor.
In addition this Chassis mount option is available with an EMI-filter (see EMI specification)
Suffix –CMF: Chassis mount adaptor with EMI filter
Please note that adaptors cannot be ordered as seperate
items but are factory assembled.
Dimensions in Inch, () = mm
Tolerances ±0.02 (±0.5)
Mounting hole pich tolerances ±0.01 (±0.25)
*Sense line to be connected
to the output either at the
module or at the load under
regard of polarity.
Pin Connection
1
– Vin
2
Case
3
Remote On/Off
4
+ Vin
5
– Vout
6
– Sense*
7
Trim
8
+ Sense*
9
+ Vout
Weight: –CMF 238 g (8.39 oz)
Order code: TEP-MK1
Includes DIN-rail clip and mounting screws.
To order modules with mounted DIN-rail clip ask factory.