Manualshelf

Datasheet

ManualsBrandsTRACOPOWER ManualsPSU ComponentsDC/DC converter (component) TEP 7 Series 110 Vdc 28 Vdc 2.7 A 75 W No. of outputs: 1 x
51525354555657585960
TEP 75WI Series
Application Note
http://www.tracopower.com Page 59 of 69
Thermal Consideration
The power module operates in a variety of thermal environments. However, sufcient cooling should be provided to help ensure
reliable operation of the unit. Heat is removed by conduction, convection, and radiation to the surrounding Environment. Proper
cooling can be veried by measuring the point as the gure below. The temperature at this location should not exceed 105 C°. When
Operating, adequate cooling must be provided to maintain the test point temperature at or below 105 C°. Although the maximum
point Temperature of the power modules is 105 C°, you can limit this Temperature to a lower value for extremely high reliability.
TOP VIEW
Measurement shown in inches (mm)