Datasheet

http://www.tracopower.com Page 2 of 4
Input Specifications
Input current at no load 24 Vin models: 25 mA typ.
48 Vin models: 20 mA typ.
110 Vin models: 10 mA typ.
Start-up voltage 24 Vin models: 9.0 VDC (or lower)
48 Vin models: 18.0 VDC (or lower)
110 Vin models: 43.0 VDC (or lower)
Under voltage shut down (lock-out circuit) 24 Vin models: 7.3 VDC min.
48 Vin models: 15.8 VDC min.
110 Vin models: 34.5 VDC min
Surge voltage (1 sec. max.) 24 Vin models: 50 V max.
48 Vin models: 100 V max.
110 Vin models: 185 V max.
Conducted noise EN 55022 class A
EMC immunity EN 50121-3-2
– ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±6 kV,
perf. criteria A
– Radiated immunity EN 61000-4-3, 20 V/m, perf. criteria A
– Fast transient / surge EN 61000-4-4, ±2 kV, perf. criteria A
EN 61000-4-5, ±1 kV, perf. criteria A
EN 61000-4-5, ±2 kV, perf. criteria A
– Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A
– Railway immunity EN 50155
Reverse voltage protection parallel diode
Output Specifications
Voltage set accuracy ±1 %
Output voltage adjustment +10 % / –20 %
Regulation – Input variation Vin min. to Vin max. 0.1 % max.
– Load variation (0 – 100 %) 0.1 % max.
Temperature coefficient ±0.02 %/K
Minimum load not required
Remote sense up to Vout nom. +10%
Ripple and noise (20 MHz Bandwidth) 12 VDC models: 125 mVpk-pk max.
24 & 28 VDC models: 250 mVpk-pk max.
48 VDC models: 350 mVpk-pk max.
DC/DC Converters
TEQ 100WIR Series 100 Watt