Datasheet

ManualsBrandsTRACOPOWER ManualsPSU ComponentsDC/DC converter (module) 48 Vdc 6500 mA 300 W No. of outputs: 1 x

ht tp://www.tracopower.com Page 1 of 4

DC/DC Converter TEQ 300WIR Series, 300 Watt

Models

• High power block with excellent

thermal convection

• Operating temperature -40°C to +80°

• Increased shock & vibration resistance

• Ultra wide 4:1 input voltage range

• EN 50155 approval for railway

applications

• Excellent efﬁciency up to 92%

• Constant current output characteristic

for battery load applications

• Power sharing (up to 3 pcs in parallel)

• Input ﬁlter meet EN 55022, class A

• I/O isolation 3000 VDC

• Inﬁnite capacitive load

• Under voltage lock-out circuit

• Soft start

• Input protection ﬁlter

The TEQ-300WIR Series is a family of isolated high performance dc-dc conver-

ter modules with ultra-wide 4:1 input voltage ranges which come in a rugged,

sealed metal case.

These converters are suitable for a wide range of applications, but the product is

designed particularly also for industrial applications where often no PCB moun-

ting is possible but the module has to be mounted on a chassis. A very high

efﬁciency and the overall heatsink construction allows an operating temperature

up to +55°C with natural convection cooling without power derating and up to

+80ºC with power derating. Further features include output voltage trimming,

Remote On/Off and under voltage lockout. The ultra wide input voltage range

and reverse input voltage protection make these converters also an interesting

solution for battery operated systems.

Order code Input voltage Output voltage Output current max. Efﬁciency typ.

TEQ 300-4812WIR

12 VDC 25 A 89 %

TEQ 300-4815WIR 18 - 75 VDC*

24 VDC 12.5 A 92 %

TEQ 300-4816WIR (nominal 48 VDC)

28 VDC 10.8 A 91 %

TEQ 300-4818WIR

48 VDC 6.3 A 92 %

TEQ 300-7212WIR

12 VDC 25 A 89 %

TEQ 300-7215WIR 43 - 160 VDC

24 VDC 12.5 A 91 %

TEQ 300-7216WIR (nominal 110 VDC)

28 VDC 10.8 A 91 %

TEQ 300-7218WIR

48 VDC 6.3 A 92 %

Models

* below 24 Vin a derating of 3.3 %/V has to be applied (see page 3)

Summary of content (4 pages)

PAGE 1
DC/DC Converter TEQ 300WIR Series, 300 Watt • High power block with excellent thermal convection • • • • Operating temperature -40°C to +80° • • Excellent efficiency up to 92% • • • • • • • Increased shock & vibration resistance Ultra wide 4:1 input voltage range EN 50155 approval for railway applications Constant current output characteristic for battery load applications Power sharing (up to 3 pcs in parallel) Input filter meet EN 55022, class A I/O isolation 3000 VDC Infinite capacitive load
PAGE 2
TEQ 300WIR Series, 300 Watt Input Specifications Input current no load 48 Vin models: 30 mA typ. 110 Vin models: 25 mA typ. Surge voltage (1 sec. max.) 48 Vin models: 100 V max. 110 Vin models: 185 V max. Start-up voltage 48 Vin models: 18 VDC (or lower) 110 Vin models: 43 VDC (or lower) Under voltage shut down 48 Vin models: 16.8 VDC (or lower) 110 Vin models: 36.
PAGE 3
TEQ 300WIR Series, 300 Watt General Specifications Isolation voltage (60 sec) – Input/Case 1‘500 VDC – Input/Output 3’000 VDC Isolation capacitance (input/output) 14‘000 pF typ. Isolation resistance (input/output) >1 Gohm Reliability, calculated MTBF (MIL-HDBK-217F at +25°C, ground benign) 195‘100 h Switching frequency Safety standards & approvals 48 Vin models: 225 kHz typ. (PWM) 110 Vin models: 200 kHz typ.
PAGE 4
TEQ 300WIR Series, 300 Watt Outline Dimensions Terminal connection Terminal 1, 2 +Vin 3, 4 –Vin (GND) 5 On/Off 6, 7 +Vout 8, 9 –Vout 10 +Sense* 11 LS (Loadshare) 12 –Sense* *Sense line to be connected to the output either at the module or at the load under regard of polarity. Dimensions in [mm], () = Inch Tolerances: x.xx ±0.5 (±0.02) Current Line Splitter each 48 Vin module has 2 bypacked splitters included The current rating of the terminal block is 15 A/pole.