Datasheet

Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
www.tracopower.com
DC/DC Converters
THM 10WI Series 10 Watt
Rev. October 27. 2015
Page 3 of 3
General Specifications
Temperature ranges – Operating –40°C to +90°C (with derating)
– Casing +105°C max.
– Storage –55°C to +125°C
Derating 3.5 %/K above +70°C
Humidity (non condensing) 95 % rel H max.
Temperature coefficient ±0.02 %/K typ.
Altitude 5000 m
Switching frequency 300 kHz ±30 kHz. (puls width modulation)
I/O isolation voltage – to meet ES/IEC/EN 60601-1 5000 VACrms, rated for 250 VACrms working
(50Hz, 60sec.) voltage, 2 x MOPP
Clearance/creepage 8 mm min.
Leakage current 2 µA max. (at 240 VAC, 60 Hz)
Isolation capacitance – Input/Output 17 pF max. (at 100 KHz, 1 V)
Safety standards ANSI/AAMI ES 60601-1:2005/(R)2012,
UL 60601-1, IEC/EN 60601-1 3rd edition
– Certification documents www.tracopower.com/overview/thm10wi
Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >3.8 Mio h
Casing material non conductive plastic (UL 94V-0-rated)
Potting material silicone (UL 94V-0-rated)
Vibration and thermal shock resistance according to MIL-STD-810F
Weight 14.0 g (0.48 oz)
Soldering temperature max. 265°C / 10 sec.
Environmental compliance – Reach www.tracopower.com/overview/thm10wi
– RoHS according RoHS directive 2011/65/EU
Outline Dimensions
Pin Single Dual
2
–Vin (GND) –Vin (GND)
11
No con. –Vout
14
+Vout +Vout
16
–Vout Common
22
+Vin (Vcc) +Vin (Vcc)
23
+Vin (Vcc) +Vin (Vcc)
Standard Pinout
Dimensions in [mm], () = Inch Tolerances ±0.5 (±0.02)
Pin ø 0.6 ±0.1 (0.024 ±0.004) Pin pich tolerances ±0.25 (±0.01)
- The component is not be used in an oxygen rich environment.
- The component is not to be used in conjunction with flammable anaesthetics and agents.
- The component has to be disposed appropriately. Please refer to local regulations (Waste Electrical and Electronic Equipment).
- A modification of the component is not allowed.
11
2223
2
16 14
Bottom view
15.24
2.54
20.3
(0.10)
(0.60)
(0.80)
10.2
(0.40)3.8
(0.15)
2.54 15.24 5.08
4.5
31.8
(0.10)
(0.60)
(0.20)
(0.18)
(1.25)
12
2324
1
15 13
Bottom view
15.24
2.54
20.3
(0.10)
(0.60)
(0.80)
10.2
(0.40)3.8
(0.15)
2.54 20.32 2x2.54
2.0
31.8
(0.10)
(0.80)
(2x0.1)
(0.08)
(1.25)
11
Standard pinning
Optional pinning: suffix -A1
Pin Single Dual
1
+Vin (Vcc) +Vin (Vcc)
11
No pin Common
12
–Vout No pin
13
+Vout –Vout
15
No pin +Vout
23
–Vin (GND) –Vin (GND)
24
–Vin (GND) –Vin (GND)
Optional Pinout