Data Sheet

THN 15WIR Series, 15 Watt
http://www.tracopower.com Page 3 of 4
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Output Specifications (continued)
Current limitation at 170 % typ. of Iout max.
Short circuit protection continuous, automatic recovery
Overvoltage protection 3.3 VDC model: 3.7 – 5.4 VDC
5.0 VDC model: 5.6 – 7.0 VDC
12 VDC model: 13.5 – 19.6 VDC
15VDC model: 18.3 – 22.0 VDC
24 VDC model: 29.1 – 32.5 VDC
Capacitive load –Single output 3.3 VDC models: 5‘200 µF max.
5.0 VDC models: 3‘600 µF max.
12 VDC models: 600 µF max.
15 VDC models: 500 µF max.
24 VDC models: 200 µF max.
–Dual output ±5 VDC models: ±1‘500 µF max. (each output)
±12 VDC models: ±360 µF max. (each output)
±15 VDC models: ±250 µF max. (each output)
±24VDC models: ±100 µF max. (each output)
General Specifications
Temperature ranges – Operating (convection cooling 20LFM, 0,1m/s) –40°C to +90°C (with derating)
– Case temperature +105°C max.
– Storage temperature –55°C to +125°C
Derating 3.3 %/K above 75°C
Humidity (non condensing) 5 – 95 % rel H max.
Temperature coefficient ±0.02 %/K max.
Thermal shock acc. MIL-STD-810F
Shock & Vibration acc. MIL-STD-810F, EN61373
Isolation voltage – I/O isolation voltage (60 sec.) 3’000 VDC
– Input to Case isolation voltage (60 sec.) 1’600 VDC
Isolation capacitance (input/output) 3‘000 pF max.
Isolation resistance (input/output) >1 Gohm
Reliability, calculated MTBF (MIL-HDBK-217F at +25°C, ground benign) 1‘600‘000 h
Switching frequency 3.3 & 5.0 VDC models: 245 kHz typ. (±25 kHz)
other models: 300 kHz typ. (±30 kHz)
Remote On/Off – On: 3.0 ... 15 VDC or open circuit
– Off: 0 ... 1.2 VDC or short circuit pin 6 and pin 2
– Off idle current: 2.5 mA typ.
Safety standards /approvals IEC/EN 60950 -1
UL 60950-1
– Certification documents www.tracopower.com/overview/thn15wir
Environmental compliance – Reach www.tracopower.com/products/reach-declaration.pdf
– RoHS RoHS directive 2011/65/EU
Physical Specifications
Casing material copper
Base material FR4 PCB
Potting material Silicone (UL94 V-0 rated)
Package weight 16.5 g (0,58 oz)
Soldering temperature max. 260°C / 10 sec.