Datasheet

ManualsBrandsTRACOPOWER ManualsPSU ComponentsDC/DC converter (print) 48 Vdc 7000 mA 30 W No. of outputs: 1 x

http://www.tracopower.com Page 1 of 4

DC/DC Converters

THN 30WI Series, 30 Watt

Features

◆

Highest power density 30W converter!

Ultra compact size: 1.0” x 1.0” x 0.4”

◆ Shielded metal case with isolated

baseplate

◆ Ultrawide 4:1 input voltage range

◆ Very high efﬁciency across full load range

up to 92%

◆ No minimum load required

◆ Remote On/Off control

◆ Operating temp. range –40°C to +80°C

and up to 85 °C with heat-sink

◆ Over temperature protection

◆ Output voltage adjustable

◆ I/O isolation voltage 1500 VDC

◆ RoHS 2011/65/EU compliant

◆ 3-year product warranty

The THN-30WI series is the latest generation of high performance DC/DC converter

modules with highest power density. The product achieves 30W output power while

it comes in a metal case with dimensions of only 1.0”x 1.0”x 0.4”.

All models have an ultra wide 4:1 input voltage range and precisely regulated

output voltages, even under no load conditions. Highest efﬁciency across full load

range makes this product very reliable and applicable in temperature ranges of up

to 85°C. With a low input current at minimal load and remote On/Off control these

converters are the ideal solution for battery-operated systems. Typical applications

are in mobile equipments, instrumentation, distributed power architectures in com-

munication and industrial electronics and everywhere where space on the PCB is

critical.

Order code Input voltage range Output voltage Output current max. Efﬁciency typ.

THN 30-2410WI

3.3 VDC 7000 mA 86 %

THN 30-2411WI

5.0 VDC 6000 mA 89 %

THN 30-2412WI

12 VDC 2500 mA 89 %

THN 30-2413WI

9 – 36 VDC

15 VDC 2000 mA 89 %

THN 30-2415WI

(24 VDC nominal)

24 VDC 1250 mA 89 %

THN 30-2425WI*

48 VDC 625 mA 91 %

THN 30-2422WI

±12 VDC ±1250 mA 89 %

THN 30-2423WI

±15 VDC ±1000 mA 91 %

THN 30-2425WI

±24 VDC ±625 mA 91 %

THN 30-4810WI

3.3 VDC 7000 mA 87 %

THN 30-4811WI

5.0 VDC 6000 mA 90 %

THN 30-4812WI

12 VDC 2500 mA 90 %

THN 30-4813WI

18 – 75 VDC

15 VDC 2000 mA 91 %

THN 30-4815WI

(48 VDC nominal)

24 VDC 1250 mA 91 %

THN 30-4825WI*

48 VDC 625 mA 91 %

THN 30-4822WI

±12 VDC ±1250 mA 91 %

THN 30-4823WI

±15 VDC ±1000 mA 92 %

THN 30-4825WI

±24 VDC ±625 mA 92 %

Models

Scheme

UL 60950-1UL 60950-1

* This dual ±24 VDC converter can be used as single 48 VDC converter (open common contact)

Summary of content (4 pages)

PAGE 1
DC/DC Converters THN 30WI Series, 30 Watt Features ◆ Highest power density 30W converter! CB Scheme UL 60950-1 Ultra compact size: 1.0” x 1.0” x 0.4” UL 60950-1 ◆ Shielded metal case with isolated baseplate ◆ Ultrawide 4:1 input voltage range ◆ Very high efficiency across full load range up to 92% ◆ No minimum load required ◆ Remote On/Off control ◆ Operating temp.
PAGE 2
DC/DC Converters THN 30WI Series 30 Watt Input Specifications Input current at no load (at nominal input voltage) 24 V models: 10 mA typ. 48 V models: 8 mA typ. Start-up voltage 24 V models: < 9.0 VDC 48 V models: < 18 VDC Under voltage shut down (lock-out circuit) 24 V models: 8.0 VDC typ. 48 V models: 16 VDC typ. Surge voltage (1 sec. max.) 24 V models: 50 V max. 48 V models: 100 V max. Reflected input ripple current 30 mAp-p typ.
PAGE 3
DC/DC Converters THN 30WI Series 30 Watt General Specifications Temperature ranges – – – – Power derating – Operating without heat sink 2.2 %/K above +55°C – Operating with heat sink 2.5 %/K above +60°C Thermal impedance – Natural convection 15.0°C/W – Natural convection with heat sink 13.8°C/W Operating without heat sink Operating with heat sink Case temperature Storage –40°C to +80°C (with derating) –40°C to +85°C (with derating) +105°C max.
PAGE 4
DC/DC Converters THN 30WI Series 30 Watt Outline Dimensions 7.62 5.08 (0.3) (0.2) 3 5.6 9.9 2.5 10.16 10.16 (0.22) (0.39) (0.1) (0.4) (0.4) (1.0) 2.5 4 5 (0.1) Bottom view 25.4 (0.8) 20.32 1 2 6 Pin-Out Pin Single Dual 1 +Vin (Vcc) +Vin (Vcc) 2 –Vin (GND) –Vin (GND) 3 +Vout +Vout 4 Trim Common 5 –Vout –Vout 6 Remote On/Off 25.4 (1.0) Dimensions in [mm], () = Inch Pin diameter ø 1.0 (0.04) Pin pitch tolerances: ±0.25 (±0.01) Tolerances: ±0.5 (±0.