Data Sheet

TIM 2SM Series, 2 Watt
http://www.tracopower.com Page 3 of 4
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
General Specifications
Capacitive load –Single output 5.0 VDC models: 1‘000 F max.
12 VDC models: 550 F max.
15 VDC models: 440 F max.
24 VDC models: 200 F max.
–Dual output ±12 VDC models: ±330 F max. (each output)
±15 VDC models: ±220 F max. (each output)
Temperature ranges – Operating –40°C to +105°C (with derating)
– Case temperature +105°C max.
– Storage temperature –55°C to +125°C
Derating tbd
Humidity (non condensing) 5 % to 95 % rel H max.
Isolation voltage – to meet ES/IEC/EN 60601-1 5000 VACrms, rated for 250 VACrms working
(50Hz, 60sec) voltage, 2  MOPP
Clearance/creepage 8 mm min.
Leakagecurrent ( at 240 VAC, 60 Hz) tbd
Isolation capacitance (input/output) tbd
Altitude during operation 5000 m
Temperature coefficient ±0.02 %/K typ.
Reliability, calculated MTBF (MIL-HDBK-217F at +25°C, ground benign) tbd
Switching frequency 100 kHz min.
Vibration and thermal shock resistance according to MIL-STD-810F
Remote On/Off –On: open circuit or high impedance
–Off: 2 – 4 mA current applied via 1kOhm resistor
–Off idle current: tbd
Safety standards/approvals
– Medical equipment ANSI/AAMI ES60601-1:2005/(R)2012,
IEC/EN60601-1 3rd edition
– Certification documents tba
Environmental compliance – Reach www.tracopower.com/products/reach-declaration.pdf
– RoHS RoHS directive 2011/65/EU
Physical Specifications
Casing material non-conductive black plastic
Base material non-conductive black plastic
Potting material tbd
Package weight tbd
Soldering temperature max. 265°C / 10 sec