Datasheet

http://www.tracopower.com Page 1 of 3

DC/DC Converters

TME Series, 1 Watt

Features

◆ Single-in-Line Package (SIP)

◆ I/O-Isolation 1‘000 VDC

◆ High Efﬁciency up to 80%

◆ Operating Temperature –40°C to +85°C

◆ Industry Standard Pinout

◆ 100% Burn-in (8 h)

◆ Lead free Design, RoHS compliant

◆ 3 Year Product Warranty

The TME series is a range of sub-miniature, isolated DC/DC-converters in a SIP-pa-

ckage, which requires only 0.7 cm2 of board space. They provide a cost effective

solution to generate supplementary, isolated voltages. Full SMD-design and a 100

% production test of parameters ensure a high reliability of this product.

Ordercode Input voltage Output voltage Output current max. Efﬁciency typ.

TME 0505S

5 VDC 200 mA 70 %

TME 0509S

9 VDC 110 mA 76 %

TME 0512S 5 VDC ±10%

12 VDC 80 mA 77 %

TME 0515S

15 VDC 65 mA 78 %

TME 1205S

5 VDC 200 mA 71 %

TME 1509S

9 VDC 110 mA 77 %

TME 1212S 12 VDC ±10%

12 VDC 80 mA 79 %

TME 1215S

15 VDC 65 mA 80 %

TME 2405S

5 VDC 200 mA 70 %

TME 2409S

9 VDC 110 mA 76 %

TME 2412S 24 VDC ±10%

12 VDC 80 mA 79 %

TME 2415S

15 VDC 65 mA 79 %

Models

RoHS

compliant

PAGE 1
DC/DC Converters TME Series, 1 Watt RoHS compliant Features ◆ Single-in-Line Package (SIP) ◆ I/O-Isolation 1‘000 VDC ◆ High Efﬁciency up to 80% ◆ Operating Temperature –40°C to +85°C ◆ Industry Standard Pinout ◆ 100% Burn-in (8 h) ◆ Lead free Design, RoHS compliant ◆ 3 Year Product Warranty The TME series is a range of sub-miniature, isolated DC/DC-converters in a SIP-package, which requires only 0.7 cm2 of board space. They provide a cost effective solution to generate supplementary, isolated voltages.
PAGE 2
DC/DC Converters TME Series 1 Watt Input Specifications Input current no load /full load 5 Vin models 30 mA / 290 mA typ. 12 Vin models 15 mA / 120 mA typ. 24 Vin models 10 mA / 60 mA typ. Surge voltage (1 sec. max.) 5 Vin models 9 V max. 12 Vin models 18 V max. 24 Vin models 30 V max. Reverse voltage protection 0.3 A max. Reflected input ripple current can be reduced by ext. 1–3.
PAGE 3
DC/DC Converters TME Series 1 Watt Physical Specifications Case material non conductive black plastic (UL 94-V0 rated) Package weight 5 Vin & 12 Vin models 1.3 g (0.05 oz) 24 Vin models 1.7 g (0.06 oz) Soldering temperature max. 265°C / 10 sec Outline Dimensions mm (inches) 10.2 (0.4) 3.2(0.13) 0.5 (0.02) Pin-Out 0.5 (0.02) 1.9 ±0.5 (0.08 ±0.02) 2.54 2.54 2.54 (0.1) (0.1) Pin Single 1 –Vin (GND) 2 +Vin (Vcc) 3 –Vout 4 +Vout 0.5 (0.02) (0.1) Bottom view (0.07) 7.0 (0.