Datasheet

Page 3 of 3
DC/DC Converters
TON 15WI Series 15 Watt
General Specifications
Thermal shock acc. MIL-STD-810F
Vibration acc. MIL-STD-810F
Reliability, calculated MTBF (MIL-HDBK-217F, at 25°C, ground benign) >2.4 Mio. h
Isolation voltage (60 sec) – Input / Output 2‘250 VDC (complies with basic insulation
rating per EN 60950-1)
Isolation resistance – Input / Output >1‘000 M Ohm
Isolation capacitance – Input / Output 1500 pF max.
Switching frequency 3.3 / 5 Vout models: 350 kHz typ.
(Pulse width modulation PWM) 12 / 15 Vout models: 400 kHz typ.
Remote On/Off – On: 3.0 to 15 VDC or open circuit.
– Off: 0 to 1.2 VDC or short circuit pin 6 and pin 2
– Off idle current: 2.5 mA typ.
negative remote On/Off logic on demand
Safety standards UL 60950-1, EN 60950-1, IEC 60950-1
Safety approval www.ul.com -> certifications -> File e188913
Environmental compliance – Reach www.tracopower.com/products/reach-declaration.pdf
– RoHS RoHS directive 2011/65/EU
Physical Specifications
Weight 10.5g (0.36oz)
Soldering profile for trough hole version max. 265°C / 10 sec. (wave soldering)
Lead-free reflow solder process for SMD-package models as per J-STD-020D.01 (to find at:
www.jedec.org - free registration required)
Washing procedure www.tracopower.com/products/ton15-clean.pdf
Outline Dimensions
Pin Single
1
+Vin (Vcc)
2
–Vin (GND)
3
+Vout
4
Trim
5
–Vout
6
Remote On/Off
Pin-Out
thru hole version (TH)SMD version (SM)
8.5
(0.335)
27.94 (1.10)
8.5
5.2
(0.20)
(0.335)
20.32 (0.80)
3.81
(0.15)
7.62
(0.3)
23.88 (0.94)
10.16 (0.4) 10.16
(0.4)
5.08
(0.2)
12
345
6
Bottom view
0.5max.
(0.02)
1.3max.
(0.05)
Section A-A
A-A
0.8
(0.031)
Dimensions in [mm], () = Inch
Tolerances: ±0.5 (±0.02)
Pin pitch tolerances: ±0.25 (±0.01)
Application note: www.tracopower.com/products/ton15wi-application.pdf
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
www.tracopower.com
Rev. July 25. 2014