Datasheet

Input Voltage
Operational Range:
90 - 132 VAC / 187 - 264 VAC (Auto Range)
Input Frequency
Operational Range:
47 - 63 Hz
Certified:
50/60 Hz
Power Consumption
- No load & Vin = 230 VAC
2'600 mW max.
- No load & Vin = 115 VAC
3'500 mW max.
Input Inrush Current
- At 230 VAC
60 A max.
Power Factor
- At 230 VAC
0.51 min.
- At 115 VAC
0.59 min.
Input Protection
T 3.15 A / 250 VAC (Internal Fuse in L & N)
Recommended Input Fuse
6'000 mA (slow blow)
(The need of an external fuse has to be assessed
in the final application.)
Input Specifications
Output Voltage Adjustment
3.3 VDC model:
3.3 - 3.5 VDC
5 VDC model:
5.0 - 5.2 VDC
12 VDC model:
12.0 - 13.0 VDC
15 VDC model:
15.0 - 16.0 VDC
24 VDC model:
24.0 - 26.0 VDC
48 VDC model:
48.0 - 52.0 VDC
(By trim potentiometer)
Output power must not exceed rated power!
Voltage Set Accuracy
±1.5% max.
Regulation
- Input Variation (Vmin - Vmax)
1% max. (3.3 Vout model)
0.5 % max. (other models)
- Load Variation (0 - 100%)
1.5% max. (3.3 Vout model)
1 % max. (other models)
Ripple and Noise
(20 MHz Bandwidth)
3.3 VDC model:
150 mVp-p max.
5 VDC model:
150 mVp-p max.
12 VDC model:
150 mVp-p max.
15 VDC model:
150 mVp-p max.
24 VDC model:
150 mVp-p max.
48 VDC model:
200 mVp-p max.
Capacitive Load
10'000 µF max.
Minimum Load
Not required
Temperature Coefficient
±0.02 %/K max.
Hold-up Time
- At 230 VAC
15 ms min.
- At 115 VAC
10 ms min.
Start-up Time
- At 230 VAC
2'000 ms max.
- At 115 VAC
3'500 ms max.
Short Circuit Protection
Automatic recovery
60% typ. of Iout nom.
Overload Protection
Foldback Mode
Output Current Limitation
150% max. of Iout max.
(depending on model)
25 A max. (3.3 Vout model)
25 A max. (5 Vout model)
11 A max. (12 Vout model)
10 A max. (15 Vout model)
6 A max. (24 Vout model)
3 A max. (48 Vout model)
Output Specifications
TOP 100 Series, 100 Watt
All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated.
www.tracopower.com September 20, 2023
Page 2 / 5