Specifications

For those who need ventilation performance

VSL400 SERIES

and desire the commercial style baffle filters,

your VSL 400 Series Liner will exceed

your expectations.

Experience…

EASY CLEANING

 Dishwasher safe commercial baffle filters

 Leading edge design is easy to clean. Eliminates grease traps.

 No unsightly screws to clean around.

QUIET OPERATION

 Variable motor control reduces blower and air movement sound

 Large, stainless steel baffle filters reduce air movement sound

 Sound absorbing duct silencers, Neoprene

lined sound absorbing fast clamps & dampers available

ENDURING QUALITY

 In-line blowers deliver 836 CFM or 1266 CFM

 Commercial grade stainless steel (#304 grade with #4 brush finish) and galvanized steel construction

 Oversized baffle filters improve ventilation performance

 Two LED lights brighten cooking area; three on 448, 454 & 460 models

 Performance tested by Energy Systems Laboratory at Texas A&M University

DISTINCTIVE LOW PROFILE DESIGN

 Style complements ALL custom and manufactured wood hood designs

 Metallic control knobs on all variable speed in-line blower models.

 Simplicity of design preferred by home owners

EASY INSTALLATION

 Remote blower models pre-wired for use with most in-line or exterior blowers

 Installs easily in standard size or custom built wood range hoods

 Wiring diagram label for simple electrical connection

PAGE 1
For those who need ventilation performance and desire the commercial style baffle filters, your VSL 400 Series Liner will exceed your expectations. VSL400 SERIES Experience… EASY CLEANING    Dishwasher safe commercial baffle filters Leading edge design is easy to clean. Eliminates grease traps. No unsightly screws to clean around.
PAGE 2
Models Available (by Width) CFM 28 /8” 3 34 /8” 3 40 /8” 3 46 /8” 3 52 /8” 3 58 /8” 3 Sones Control - VSL430BF VSL436BF VSL442BF VSL448BF VSL454BF VSL460BF N/A Variable Notes: Blower In-Line or Remote Mount Blower 1 1. Center of electrical access is 7" from the front & 2 /2” from side of liner. Connection access is behind filters. 2. Vent is 8” (models 430 & 436) or 10” (442, 448, 454, & 460). Damper not included. 1 3.