Installation Guide

Revised 6/11/18 Copyright © 2018 Trade-Wind Manufacturing, LLC Proverbs 22:29 Page 6
Important Cut-out Information
Cabinet or hood cutouts should be at least 1/8‖ larger that the following outside dimensions
Models Available (by Width)
Pic
CFM
34
3/
8
”
40
3/
8
”
46
3/
8
”
52
3/
8
”
58
3/
8
”
Sones
Control
Blower
A
-
VSL436-0-22-BF
VSL442-0-22-BF
VSL448-0-22-BF
VSL454-0-22-BF
VSL460-0-22-BF
N/A
Variable
In-Line or Remote
Mount Blower
B
600
VSL436622RC
VSL442622RC
VSL448622RC
-
-
7.5
3-Speed
Internal Motor
C
1200
-
VSL4421222RC
VSL4481222RC
VSL4541222RC
VSL4601222RC
8.5
(2) 3-Speed
Two Internal
Motors
Notes:
1. Center of electrical access is 7‖ from front & 2
1
/
2
‖ from side
of liner. Connection access is behind filters.
2. Vent is 8‖ (36‖ widths) or 10‖ (42‖ & 48‖ widths). Damper not
included.
3. Length & width cutouts should be 1/8‖ larger than above
dimensions.
Notes:
1. Center of electrical access is 7‖ from front & 2
1
/
2
‖ from side of
liner. Connection access is behind filters.
2. Damper not included.
3. Length & width cutouts should be 1/8‖ larger than above
dimensions.
Notes:
1. Center of electrical access is 7‖ from front & 2
1
/
2
‖ from side
of liner. Connection access is behind filters.
2. Damper not included. (No Vent Transition Needed)
3. Length & width cutouts should be 1/8‖ larger than above
dimensions.
A
B
C