Instructions / Assembly

REMOVE ALL PIECES FROM THE BOX:

2 posts with armrests

1 push bar

1 head frame

1 headrest

10 screws

8 washers

8 bolts

1 wrench

1 allen wrench

Using the tools included attach both posts with arm rests to each side of the head frame using 2 screws, 2 washers

and 2 bolts on each side.

ABTRAINER

Assembly Instructions

PAGE 1
ABTRAINER Assembly Instructions REMOVE ALL PIECES FROM THE BOX: 2 posts with armrests 1 push bar 1 head frame 1 headrest 10 screws 8 washers 8 bolts 1 wrench 1 allen wrench Using the tools included attach both posts with arm rests to each side of the head frame using 2 screws, 2 washers and 2 bolts on each side.
PAGE 2
STEP 3 STEP 4 Attach the push bar to both posts with arm rests using 4 screws, 4 washers and 4 bolts. Attach the headrest to the to the head frame using 2 screws STEP 5 Tighten all screws and your abtrainer is complete! WE VALUE OUR CUSTOMERS AND WANT TO BE SURE YOU ARE SATISFIED WITH YOUR PRODUCT. IF YOU HAVE ANY QUESTIONS OR CONCERNS OR YOU ARE NOT COMPLETELY SATISFIED, PLEASE CONTACT OUR OFFICE AT 1-800-906-1639.