Instructions / Assembly

TEEPEE

Assembly Instructions

Package contents:

5 38-inch wooden poles with pre-drilled hole at one end

5 38-inch wooden poles with no pre-drilled hole

5 PVC pole connectors

5 Poles Laces

1 Canvas Teepee Canopy

STEP 1: Assemble the 38-inch poles into 76-inch poles.

PVC pole connectors - connect the small ends of one pole with a pre-drilled hole,

and one pole with no pre-drilled hole, until all 38-inch poles are assembled into 76-inch poles.

STEP 2:

with all corners spread out

STEP 3:

Insert the 76-inch poles into the teepee canopy.

Make sure that the pre-drilled holes in the poles are at the top.

The teepee canopy has sleeves sewn into it to insert the poles.

Slide the poles into these sleeves.

Start with the ﬁrst sleeve to the left of the door.

The teepee canopy is circular -

PAGE 1
TEEPEE Assembly Instructions Package contents: 5 38-inch wooden poles with pre-drilled hole at one end 5 38-inch wooden poles with no pre-drilled hole 5 PVC pole connectors 5 Poles Laces 1 Canvas Teepee Canopy STEP 1: Assemble the 38-inch poles into 76-inch poles. PVC pole connectors - connect the small ends of one pole with a pre-drilled hole, and one pole with no pre-drilled hole, until all 38-inch poles are assembled into 76-inch poles.
PAGE 2
STEP 4: Stand up the entire assembly. Pull up the teepee canopy to make sure that the poles are secured and in place STEP 5: Once the 5 laces are threaded, tie each lace to its partner lace. STEP 6: Stand up the teepee and spread apart the tent poles until the canopy is evenly spread out. We hope that you are satisfied with this product and that it meets your expectations.