Warranty

1
H o m e D e p o t T r a d e w i n d s W A R R A N T Y -
( E f f e c t i v e J a n u a r y 1 , 2 0 1 4 )
WARRANTED PERFORMANCE
Tradewinds warrants that the PLASTISOL coated products detailed will not:
• Peel, chip, crack, rot or warp for a period of five (5) five years from the date of invoice.
• Chalk in excess of numerical rating of eight (8) when measured in
accordance with the standard procedures specified in ASTM D 4214-
98 for a period of five (5) five years from the date of invoice.
• Fade or change color in excess of seven (7) "E" units (McAdam)
calculated in accordance with the standard procedures specified in
ASTM D 2244 for a period of five (5) five years from the date of invoice.
Color measurements are to be performed on clean surfaces, free of all
contaminates such as dirt, chalk, dust, mud or oxidized films
Tradewinds warrants that the POWDER coated products will:
• Meet and exceed AAMA 2604-05 (American Architectural Manufacturers Association)
test specifications.
• Be free from defects in material and/or workmanship for a period of (5) five years from
date of invoice
CLAIMS FOR BREACH OF WARRANTY
• No claim for breach of warranty can be instituted unless Tradewinds has been given written notice within
thirty (30) days upon discovery of any alleged defect of the Tradewinds products covered hereunder with
a statement describing with specification in which respect the alleged defect constitutes a breach of the
warranty provided herein. Tradewinds must be given a reasonable opportunity to inspect the Tradewinds
product claimed to be defective.
• For each proven breach of warranty pertaining to the Tradewinds products, Tradewinds liability shall be
limited to refinishing or replacing, at Tradewinds discretion, any subject product showing such defect. The
cost of the replacement of the subject products shall include only the cost of the necessary replacement
material and transportation charges, it shall not cover any labor costs in connection with such
replacement. Refinishing of the defective subject product shall be performed by using standard finishing
practices and materials as selected by Tradewinds.
• In all cases, Tradewinds reserves the right to approve and/or negotiate with purchaser for such
refinishing and/or replacing. All replacement parts shall be guaranteed for the balance of the original
warranty period.
• Except as provided herein, Tradewinds shall in no way be liable for, and they are hereby excluded from
any general, special, compensatory, incidental or consequential damages resulting from any defect of
Tradewinds products.