Manual

1375 Boston Post Rd., Old Saybrook CT 06475
phone [phone] or 1-860-388-4656 fax [phone]
[e-mail]
www.traditionsfirearms.com
Jpjr3/3/08
Note: If the breech plug does not thread smoothly or seat fully, remove it and visually inspect the o-ring for wear and the
threads on the plug and inside the barrel for fouling or obstructions. Also, if the breech plug is not seated all the way the
barrel may not seat into the tang or the stock all the way.
Traditions™ recommends removing, cleaning and re-lubing the breech plug every 10-15 shots. With proper maintenance and
care the o-ring will last many years. The o-ring is in place as a gas check and helps to block fouling from reaching the threads.
The plug can still be used without the o-ring but may become difficult to remove due to the fouling that will take place.
Before using your firearms, be sure it is in good working order. Check to be sure all the screws are tight, all the safeties are
working correctly, and all the components are functioning properly. Safe firearm handling is the responsibility of all gun
owners.