Owner Manual

INTRODUCTION
Congratulations on your purchase of this Traeger Wood Pellet Grill, Model BBQPIG.
NOTE: NUMBERS FOLLOWING PART NAMES REFER TO THE COMPONENT
DIAGRAM FOUND NEAR THE END OF THIS MANUAL.
After removing the box from the Grill, remove all parts from inside the Grill. Remove any
remaining packaging material from inside the Grill as well. Make sure you have, and can
identify all of the following parts:
Qty Item Description Component Diagram Reference Number
(1) Grill-----------------------------------------------------------------------1
(1) Front Leg Assembly--------------------------------------------------5
(1) Rear Leg Assembly---------------------------------------------------6
(2) Pig Ear Assembly----------------------------------------------------- 9
(1) Door Handle------------------------------------------------------------10
(2) Locking Casters-------------------------------------------------------27
(2) Casters------------------------------------------------------------------28
(1) Heat Baffle-------------------------------------------------------------33
(1) Grease Drain Pan----------------------------------------------------34
(1) Porcelain Grill---------------------------------------------------------35
(1) Grease Bucket--------------------------------------------------------38
You will need to complete the assembly process by:
1) Unpack the grill
2) Installing the Casters (27, 28)
3) Install Front and Rear Leg Assemblies. (5, 6)
4) Install Pig Ear Assemblies. (9)
5) Install Door Handle (10) to Door (2).
6) Positioning the Heat Baffle (33) over the Firepot (34)
7) Setting the Grease Drain Pan (34) over the Heat Baffle (33)
8) Placing the Porcelain Grill (35) on the Grill Supports.
9) Hanging the Grease Bucket (38) on the Bucket Hook.
TOOLS REQUIRED FOR ASSEMBLY:
One each 1/4" drive socket, Nut Driver, or Wrench.
One each Phillips head screw driver.
Follow these step by step instructions and you will be cooking in no time!