Owner Manual

SECTION ONE: ASSEMBLY INSTRUCTIONS
REMOVING THE SHIPPING BRACKETS:
Remove the box and the packaging materials from the grill. Keep them until you have
inspected the grill. Once you have inspected the grill then the packaging can be
discarded.
INSTALLING THE CASTERS TO LEG ASSEMBLIES:
Insert Caster W/Lock (27) onto the Front Leg Assembly (5) and Rear Leg Assembly (6)
as shown. Then insert Caster W/O Lock onto Front Leg Assembly (5) and Rear Leg
Assembly (6) as shown.
INSTALLING LEG ASSEMBLIES TO GRILL FRAME:
This portion of the assembly process will require two people for safety.
Carefully lay the Grill on its back on a non-abrasive surface. Install the front leg
assembly (5) onto the grill frame aligning the mounting holes with the holes in the body.
Secure using 4 each 1/4-20 PPHD screws (25) and 1/4 flat washers (26). Repeat the
process on the rear leg assembly (6). With your helper, stand the Grill upright.