Charcoal Grill User Manual

INTRODUCTION
Congratulations on the purchase of your Traeger Pellet Fired Grill, Model
BBQLHS. With proper set-up, operation, and maintenance, this grill will provide
years of delicious food and cooking enjoyment.
Your new BBQLHS comes partially assembled. You will need to complete
the assembly process by:
1) Installing the four VIPER casters on the steer’s feet (16)
2) Position the U-shaped firepot cover (11) over the firepot (10) and
set the angled drip pan (12) over the U-shaped firepot cover (11).
3) Placing the porcelain coated cooking grid into place (15)
4) Attaching the steer horns to the barbecue.
NOTE: NUMBERS FOLLOWING PART NAMES THROUGHOUT THIS
MANUAL REFER TO THE COMPONENT DIAGRAM ON THE PREVIOUS
PAGE.
When un-boxing your grill, make sure you have, and can identify the following
parts:
(1) bag of washers, nuts and bolts for mounting the
heavy-duty casters.
(4) heavy-duty casters (16).
(1) porcelain cooking grill (15)
(1) angled drip pan (12)
(1) heavy metal U-shaped firepot cover (11)
(1) galvanized metal grease bucket (13)
Follow these step by step instructions and you will be cookin’ in no time!
TOOLS REQUIRED FOR ASSEMBLY:
One 7/16” open end wrench, adjustable crescent wrench or socket wrench.