MSDS

ManualsBrandsTrafficMASTER ManualsFlooringStandard 100 sq. ft. Rolls 25 ft. x 4 ft. x .080 in. Polyethylene Foam 2-in-1 Underlayment

MSDS Number: PE-NAT

Issue Date: 12/04

Revised Date: 3/11

Material Safety Data Sheet

The “9 Dot Logo” and “Sealed Air” are registered trademarks of Sealed Air Corporation (US).

Page: 1 of 4

EMERGENCY NUMBERS:

Sealed Air Corporation

(201) 712-7000

For emergency and general information 8:30am - 5:00pm (Eastern

Time), Monday - Friday

CHEMTREC

(800) 424-9300

For Chemical Emergency - spill, leak, fire, exposure or accident, 24

hours

SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

Product Name: Cell-Aire

, Corro-Foam

, CelluPlank

, Ethafoam

260CI,

Synergy

, Stratocell

Plus, Cellu-Cushion

, Cellu-Cushion

84, and Opti-Step

polyethylene foams. Includes various extruded

polyethylene foam profiles and laminates (Dolphin-Pad™).

Chemical Name: Polyethylene

Trade Name: Polyethylene Foam

Chemical Family: Plastics

Chemical Formula: N.A.

SECTION 2 - COMPOSITION / INFORMATION ON INGREDIENTS

Hazardous Ingredient

CAS No. Wt. % OSHA-PEL ACGIH-TLV

Polyethylene 9002-88-4 85-100 N.E. N.E.

Hydrocarbon Gas 75-28-5 or 74-98-6 0-5 800 ppm 800 ppm

Glycerol Stearate Mixture 0-2 N.E. N.E.

Color Concentrate Variety 0-1 N.E. N.E.

SECTION 3 - HAZARDOUS IDENTIFICATION

Appearance:

Solid Plastic Foam. White or colored solid.

Odor:

None

Eye:

Dust may cause irritation or corneal injury due to mechanical action. Fumes released during hot

operation may cause eye irritation.

Skin:

May cause skin irritation.

Ingestion

: May be harmful if swallowed.

Inhalation:

Fumes generated under heat may cause eye irritation and respiratory irritation. Dust may

cause irritation to upper respiratory tract and lungs.

Note: Read the entire MSDS for a more thorough evaluation of the hazards.

SECTION 4 - FIRST AID MEASURES

Skin Contact:

Wash with soap and water.

Eye Contact:

Flush eyes with plenty of water to remove particulate.

Summary of content (4 pages)

PAGE 1
Material Safety Data Sheet MSDS Number: Issue Date: Revised Date: Page: EMERGENCY NUMBERS: Sealed Air Corporation For emergency and general information 8:30am - 5:00pm (Eastern (201) 712-7000 Time), Monday - Friday CHEMTREC For Chemical Emergency - spill, leak, fire, exposure or accident, 24 (800) 424-9300 hours SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Cell-Aire®, Corro-Foam®, CelluPlank®, Ethafoam®, Ethafoam® 260CI, Synergy®, Stratocell®, Stratocell® Plus, Cellu-Cushion®, Cellu-Cushion® 84
PAGE 2
Material Safety Data Sheet MSDS Number: Issue Date: Revised Date: Page: PE-NAT 12/04 3/11 2 of 4 SECTION 4 - FIRST AID MEASURES (CONTINUED) Ingestion: Not a likely route of exposure. Induce vomiting if large quantities are swallowed. Inhalation: Remove to fresh air. If not breathing administer artificial respiration. Oxygen may be given by qualified personnel. Get medical attention. SECTION 5 - FIRE FIGHTING MEASURES Flash Point: Polyethylene: N.A.
PAGE 3
Material Safety Data Sheet MSDS Number: Issue Date: Revised Date: Page: PE-NAT 12/04 3/11 3 of 4 SECTION 7 - HANDLING AND STORAGE (CONTINUED) WARNING: Fabricating operations which cut large numbers of interior foam cells, can release localized amounts of flammable, residual blowing agent. Provide adequate ventilation to avoid the build up of blowing agent concentration. WARNING: Transport large quantities of this polyethylene foam in ventilated vehicles.
PAGE 4
Material Safety Data Sheet MSDS Number: Issue Date: Revised Date: Page: SECTION 11 - TOXICOLOGICAL INFORMATION No applicable or available data for this section. SECTION 12 - ECOLOGICAL INFORMATION This product is inert to the environment and is not expected to exhibit any significant biodegradation. SECTION 13 - DISPOSAL CONSIDERATIONS Reuse, recycle, incinerate, or dispose in approved landfill. Follow all regulatory requirements for disposal. SECTION 14 - TRANSPORT INFORMATION DOT: Not regulated.