Installation Guide

Yarn Direction

Installation

Installation precautions

Gentle assembly and disassembly is required.

Install grass tiles on a flat and clean ground, NO water or oil on the surface.

Maximum load capacity on tiles is 440LBS. Transverse force should not be applied on the turf surface after the installation.

Store the grass tiles by placing them either back to back or face to face to avoid the pit appearance on the surface.

For additional support, you may contact the distributer: sales@concordglobal.net

Brush the seam by hand against the pile to

make them invisible.

Assemble all

the grass tiles

in the same

way.

Scan the QR code

to watch installation

the video.

Rest grass tiles for 24 hours or brush the pile by

hand in the opposite direction to bring the product

to a natural state.

24h

Keep the

top of grass

tile aligned,

lift sockets

slightly to

match plugs,

press and

lock them

together.

Put grass tiles

on a flat surface.

Make sure the

pile is in the

same direction

when installing.

Socket

DIY GRASS TILES INSTALLATION INSTRUCTIONS

Plug

PAGE 1
DIY GRASS TILES INSTALLATION INSTRUCTIONS Installation 1 2 24h Yarn Direction OR Put grass tiles on a flat surface. Make sure the pile is in the same direction when installing. Rest grass tiles for 24 hours or brush the pile by hand in the opposite direction to bring the product to a natural state. 3 Keep t he top of grass tile aligned, lift sockets slightly to match plugs, press and lock them together. Plug Socket 5 Assemble all the grass tiles in the same way.
PAGE 2
INSTRUCCIONES DE INSTALACIÓN DE BALDOSAS DE HIERBA Instalación 1 2 24h Direccion de la hierba O Descanse las baldosas de césped durante 24 horas o cepille la pila a mano en la dirección opuesta para llevar el producto a un estado natural. Poner las baldosas de césped sobre una superf icie plana. A s egurarse de que la pila está en el misma dirección al instalarse.