Installation Guide

Measure the Area

You will need to know exact measurement

of the Area where you want to install.

So you can have enough product to cover

the installation Area.

If you are installing on a existing natural

grass,mow shortest to the ground.

Top Soil the ground ﬁrst

Find a Bare Ground spot and seed

the area

For more information on installation, please

visit our website or give us a call.

Tel: 201-343-3468

http://ezhybridturf.com/video.html

Preparing Guide

Seed on top of the Top Soil.

For Natural Grass or Sod

For Bare Ground 1

PAGE 1
Preparing Guide For Natural Grass or Sod Measure the Area You will need to know exact measurement of the Area where you want to install. So you can have enough product to cover the installation Area. If you are installing on a existing natural grass,mow shortest to the ground. Find a Bare Ground spot and seed the area Top Soil the ground ﬁrst Seed on top of the Top Soil. For Bare Ground 1 For more information on installation, please visit our website or give us a call.
PAGE 2
Installation Guide 2. Open the Package Open the package using sharp box cutting knife. Becareful not to damage the turf. 3. Cut off Selvedge Cutting the selvedge will prevent from wrinkling up. It will be much easier to pull and stretch out to get best installation. 5. Nail Down U-Pin 4. Lay Down to the Ground Lay down where you want to install Make sure all the wrinkles are gone. 6. Final look 6ft Position of U-pin 10ft" Black dots are the positions of U-Pins. 1 U-Pin for every 1ft for Out layer.