Installation Guide

D.I.Y. Peel-n-Stick
Installation & Warranty Guidelines
February 2016 Page 5
Remember: if a finish is applied this will become part of the regular maintenance and may require
periodic stripping and reapplication of the finish.
 Use of nylon or felt-type furniture guides is required under all furniture. All types of furniture
glides/protectors should be changed regularly to prevent scratching from embedded debris in the glide.
 Grouted Installations: floor will be ready for light foot traffic 24 hours after installation and pets, heavy
traffic and furniture/fixtures are permitted 72 hours after installation. Allow 7 days for grout to achieve
final cure which includes hardness and stain resistance. ALLOW 7 DAYS BEFORE EXPOSURE TO WATER.
 Do not use solvents, haze removers, sealers or heavy cleaning chemicals on any Luxury Vinyl Tile Grout.
 When utilizing premixed Luxury Vinyl Tile Grout, be sure to follow the manufacturer’s recommended
curing times for the adhesives used to install the tile. Failure to do so could result in adhesive not fully
curing and movement or lifting of tiles.
IMPORTANT:
 Do not clean with soap and water; soaps and detergents may leave a film on the surface of the vinyl.
 Do not slide furniture, chairs or objects across the vinyl flooring.
 Do not use any type of abrasive material or cleaners on the flooring.
 Do not walk on floor with cleats, spikes or similar type shoes.
REGULAR MAINTENANCE:
 Regular sweeping or vacuuming with a brushless vacuum will keep dirt and debris off the vinyl floor.
 Ensure all furniture and fixtures have the appropriate floor protectors installed and are changed regularly.
 Damp mop the floor weekly to remove dirt; a small amount of a neutral pH cleaner can be used to help
remove dirt and buildups. A white scrub pad can be used on heavy deposits. Do not use multi-surface or
ammoniated cleaners.
 Use of a finish is not recommended by the Manufacturer. Contact Home Depot Care for further
instructions.