Specification Sheet

www.traffixdevices.com

• 32” tall x 72” long. Low proﬁ le allows motorists in all vehicle types to view oncoming trafﬁ c at intersections.

• Tested and passed, NCHRP-350 TL-1 Barrier Wall, TL-2 Longitudinal Channelizing Device and TL-3

Barricade

• Double wall knuckle design minimizes breakage and creates a strong connection at hinge points.

• Durable linear low density polyethylene plastic minimizes cracking and breaking.

Water-Filled Barrier

Water-WallWater-Wall

™

ffi d i

• Hinge design allows for a 30-degree pivot between sections.

• Large 8” ﬁ ll hole speeds ﬁ lling process, includes twist-lock plastic cap.

• Tamper resistant, offset drain plug with coarse buttress thread - screws in or out in only 2.5 turns.

• Includes one steel connection pin and keeper pin per wall to allow sections to be locked together.

L-

-2

-3

FHWA NCHRP-350,

TL-1 Tested and Passed

• Forklift and pallet jack slots are molded in for easy movement.

• Standard colors are orange/red or white - additional colors available upon request.

• Accepts the Water-Wall chain link fence for additional job site security.

PAGE 1
Water-Wall Water-Filled Barrier ™ FHWA NCHRP-350, TL-1 Tested and Passed • Tested and passed, NCHRP-350 TL-1 Barrier Wall Wall, TL-2 Longitudinal Channelizing Device and TL-3 Barricade • 32” tall x 72” long. Low profile allows motorists in all vehicle types to view oncoming traffic at intersections. • Durable linear low density polyethylene plastic minimizes cracking and breaking. • Double wall knuckle design minimizes breakage and creates a strong connection at hinge points.
PAGE 2
Water-Wall® 30-degree pivoting hinge design allows the TrafFix Water-Wall to handle curved roads Specification Water-Wall barrier to be 72” long x 32” tall x 18” wide and molded from linear low density polyethylene. Water-Wall to be NCHRP-350 TL-1 tested and passed as a barrier. Individual wall shall weigh 80 lbs. empty and 1,110 lbs. filled. Standard colors are white or orange.