Specification Sheet

160 Avenida La Pata, San Clemente, CA 92673
[phone] FAX [phone]
www.traxdevices.com
Distributed by:
Water-Wall
®
PB0714
Specifi cation
Water-Wall barrier to be 72” long x 32” tall x 18” wide and molded from linear low density polyethylene.
Water-Wall to be NCHRP-350 TL-1 tested and passed as a barrier. Individual wall shall weigh 80 lbs. empty
and 1,110 lbs. fi lled. Standard colors are white or orange. Water-Wall sections are connected together with
galvanized steel T-pins passing through a double wall knuckle which minimizes breakage at hinge points. Wall
shall pivot up to 30 degrees when connected. Water-Wall to have one 8” diameter fi ll hole for quick fi ll and
a twist lock cap for closure. Water-Wall will have molded thru holes to provide easy movement. Drain plug
to be offset to protect against cracking or breaking and have course buttress threads for quick removal and
attachment. Water-Walls shall stack for easy movement and storage.
Water-Wall can be easily lifted and
placed using a forklift or pallet jack
Water-Wall stacks for storage and
transportation
New tamper resistant, offset drain plug with coarse
buttress thread
NCHRP 350 Approved As:
TL-1 Longitudinal Barrier - HSA-10/B-130
TL-2 Longitudinal Channelizing Device - HSA-10/WZ-224
TL-3 Barricade - HSA-10/WZ-224
Specifi cations
Lenth 72”
Height 32”
Width 18”
Weight (Empty) 80 lbs.
Weight (Filled with water) 1,110 lbs.
Material Linear Low Density Polyethylene
Color Orange/Red or White
Large 8’ fi ll hole speeds fi ling process, includes
twist-lock plastic cap
30-degree pivoting hinge design allows the TrafFix Water-Wall to handle curved roads
Water-Wall Fence can be easily attached to Water-
Wall for additional job-site security.
Water-Wall can pivot 30-degrees
and be locked together with steel
connection pins