User Manual

16
VEHICLE MOUNTING
Trail Tech lights have a polarity requirement.
Trail Tech lights have a polarity requirement.
The red lead must go to the positive(+)
battery terminal or lead, and the negative
lead must go to the negative(-) battery
terminal or ground.
BACKWARDS WIRING WILL
DAMAGE THE LIGHTS!
Polarity Requirement:
Trail Tech lights can be mounted to vehicles on the frame,
handlebars, body or custom positioned. Regardless of location,
installation/wiring is similiar.
If there is enough power available, Trail Tech lights can be run in
addition to stock lights. Some vehicles require lights to run on a
separate circuit, because enough power is not produced to run all
the lights simultaneously.
Trail Tech HID and LED lights will only run on a DC electrical
system (12 volts DC.) A qualifi ed technician can convert most AC
systems to DC systems (Banshee, 250R, etc.) Contact your local
Trail Tech dealer for details.
Vehicle Mounting Overview: