User Manual

18
HELMET MOUNTING
Use either Trail Tech Li-Ion batteries with Trail Tech helmet lights,
or wire to the vehicle battery using the included connector. Third-
party batteries may damage the system. Altering the bungee or
any other part of the helmet light system will void warranty.
WARNING:
Trail Tech helmet lights are attached with permanent 3M VHB tape.
The adhesive will strengthen with time: allow 1 hour before use.
Before attaching the lights, wear the helmet in a riding position.
Hold the lights in the desired position to confi rm aim angle.
Use the illustrations below to position the lights on the helmet.
ATTACH HELMET LIGHTS TO HELMET:
To side mount,
align to back
of goggle
opening.
Top mounting provides
the greatest visibility.